Engine Camshaft and Lifter Kit

Edelbrock Performer-Plus Camshaft #2106 is designed for 352-428 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2106 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 410 Ft Lbs of Torque when paired with Performer 390 intake manifold #2105 and stock cylinder heads. Will not work in 427 side-oilers. Camshaft specifications: – Intake duration: 194 Degrees – Exhaust duration: 204 Degrees – Intake lift: .460" – Exhaust lift: .480" – Lobe separation: 110 Degree – Intake Center Line: 105 Degree – Vacuum: 16"

Additional Attributes:

GTIN: 00085347021062
Advertised Exhaust Duration: 292
Advertised Intake Duration: 282
Cam Type: Cast
Computer Controlled Compatible: No
Exhaust Duration at .050 inch Lift: 214
Exhaust Valve Lift: 0.480
Grade Type: Performance
Intake Duration .050 Inch Lift: 194
Intake Valve Lift: 0.460
Lifter Materials: Hardened Steel
Lifter Type: Hydraulic
Lobe Separation: 110
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Extended Information:

Emissions : EPA Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 27 x 8 x 3.6 inches
Weight: 16.2 PG