Engine Camshaft and Lifter Kit

Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: – Duration @ .050 Intake: 204 degrees – Duration @ .050 Exhaust: 214 degrees – Lift @ Valve Intake: .449" – Lift @ Valve Exhaust: .473" – Lobe Separation: 114 Degrees – Intake Centerline: 106 Degrees – Idle Vacuum @ 1000 RPM's: 16"

Additional Attributes:

GTIN: 00085347037124
Advertised Exhaust Duration: 290
Advertised Intake Duration: 280
Cam Type: Cast
Computer Controlled Compatible: No
Exhaust Duration at .050 inch Lift: 204
Exhaust Valve Lift: 0.472
Grade Type: Performance
Intake Duration .050 Inch Lift: 204
Intake Valve Lift: 0.448
Lifter Materials: Hardened Steel
Lifter Type: Hydraulic
Lobe Separation: 114
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Extended Information:

Emissions : EPA Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 26.5 x 8 x 3.5 inches
Weight: 15.4 PG