Engine Camshaft and Lifter Kit

Edelbrock part #2172 Performer-Plus camshaft is designed for small-block Ford 351M-400 V-8 applications. This Edelbrock cam kit produced 390 ft-lbs. of torque when used with #2171 intake and stock iron cylinder heads on a 400 engine.

$ 535.67

Edelbrock part #2172 Performer-Plus camshaft is designed for Ford 351M-400 V-8 applications. This Edelbrock cam kit produced 390 ft-lbs. of torque when used with #2171 intake and stock iron cylinder heads on a 400 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: – Duration @ .050 Intake: 204 degrees – Duration @ .050 Exhaust: 214 degrees – Lift @ Valve Intake: .484" – Lift @ Valve Exhaust: .510" – Lobe Separation: 112 Degrees – Intake Centerline: 107 Degrees – Idle Vacuum @ 1000 RPM's: 14"

Additional Attributes:

GTIN: 00085347021727
Advertised Exhaust Duration: 292
Advertised Intake Duration: 282
Cam Type: Cast
Computer Controlled Compatible: No
Exhaust Duration at .050 inch Lift: 214
Exhaust Valve Lift: 0.510
Grade Type: Performance
Intake Duration .050 Inch Lift: 204
Intake Valve Lift: 0.484
Lifter Materials: Hardened Steel
Lifter Type: Hydraulic
Lobe Separation: 112
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.