Pro-Flo 4 EFI Upgrade Kit (from Legacy Pro-Flo to Pro-Flo 4)

This Pro-Flo 4 EFI kit provides a solution for consumers who own a legacy Pro-Flo EFI System and want to upgrade to Pro-Flo 4.

The Legacy Pro-Flo to Pro-Flo 4 EFI Upgrade Kit includes a harness, supporting sensors, and components for converting from a Legacy Pro-Flo EFI System to Pro-Flo 4 EFI. This kit consists of supporting sensors, ECU, wide-band O2 sensor, wiring harness, IAC valve, and IAC adapter. This EFI system has both fuel and spark control features.
The ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock’s E-Tuner Software for IOS and Android tablets and cell phones. The software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc.

The customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors, as well as a Pro-Flo distributor, fuel pump, regulator, and fuel lines. Users must refer to the Calibration Matrix in the instructions for the required injector size, depending on engine cubic inches and HP requirements. Required injector sizes 29 lb./hr., 35 lb./hr., 42 lb./hr., and 60 lb./hr. Compatibility with forced induction applications requires 80 lb./hr. injectors.

Additional Attributes:

GTIN: 00085347899203
Cross sell / Upsell Part Numbers: 35760 35820 35823 35810 35813 35790 35793 35870 35873 35860 29785 71383 7136 71363 7138 71383 29045 7137 71373
Data Logger: Yes
Display Included: No
Distributor Included: Yes
Drive-By-Wire Capable: No
ECU Included: Yes
EGR: No
Fuel Injectors included: No
Fuel Pressure Regulator Included: No
Fuel Pump Included: No
Fuel Rails Included: No
Handheld Controller Included: No
IAC Motor Included: No
IAT Sensor Included: Yes
Injection Style: Sequential Port
Injector Size (lbs/hr): N/A
Intake Finish: N/A
Intake Manifold Included: No
Intake Material: N/A
MAP Sensor Included: Yes
Maximum Horsepower with Gas: 900
Metering Style: Speed Density
Notes: System tuning supported by E Tuner 4 App
Oxygen Sensor Included: Yes
Power Adder Compatible: Yes
Prop 65 – Long Label: WARNING: This product can expose you to Tetrabromobisphenol A, Nickel, Carbon Black, Nickel Monoxide, 2-Methylimidazole, Cobalt, Antimony trioxide, and Cadmium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Prop 65 Y/N: Y
Quantity: Sold as kit
Related Products: All Edelbrock and FAST EFI Manifolds 22746 Ignition Coil FAST and Edelbrock Throttle Bodies IAC Adapter FAST #307022, Edelbrock #3855 Edelbrock Pico and Siemens Fuel Injectors 29LbHr, 35LbHr, 42LbHr. 60LbHr, 80LbHr Air Cleaners EFI Fuel systems 36031 Edelbrock Fuel Sump 8041 Throttle and Trans Kick Down Bracket
Required Products: A legacy Edelbrock Pro Flo EFI system
Self Tuning: Yes
Throttle Body Finish: N/A
Throttle Body Included: No
Throttle Body Material: N/A
Timing Control Compatible: Yes
TPS Sensor Included: No
Transmission Controller Included: No
User Tunable: Yes
Wiring harness included: Yes

Extended Information:

Emissions : Racing or Pre-Emissions Use Only
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: KT
Dimension: 12.7 x 10.3 x 7.8 inches
Weight: 5.75 PG

PDF:

63-35715 Install Instructions PF4