Hot-Side Intercooler Pipe and Boot Kit, fits 6.6L Duramax L5P ’17-’19, Polished

Improve the power and efficiency of your 2017-2019 Chevrolet/GMC 6.6L Duramax L5P with the Mishimoto hot-side intercooler pipe and boot kit. The factory hot-side pipe for the L5P is a measly 2.5in that chokes the engine, while the tight bends and built-in resonator create even more restriction. The Mishimoto hot-side intercooler pipe is 3in in diameter throughout and eliminates the factory resonator to significantly increase airflow, resulting in more power potential. Mishimoto designed this pipe as two pieces, like the factory pipe, for ease of install. This kit also includes our silicone boots with DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle-black powder coated finish. Like all our Duramax products, this hot-side intercooler pipe and boot kit includes our Mishimoto Lifetime Warranty for a lifetime of performance.

Additional Attributes:

GTIN: 00840197700600
Install Difficulty: 3
OptionLabel: Polished
Prop 65 – Short Label: WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
SellingPoint02: 3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends
SellingPoint03: Eliminates stock resonator for improved flow
SellingPoint04: Up to 55-percent less restrictive than stock piping
SellingPoint05: Bung can be drilled and tapped for additional sensors
SellingPoint06: Requires no additional tuning
SellingPoint07: Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
SellingPoint08: Available in polished or wrinkle-black powder coated finish
SellingPoint09: Mishimoto Lifetime Warranty
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2017-2019 Chevrolet Silverado 2500 HD w/ 6.6L Duramax L5P–2017-2019 Chevrolet Silverado 3500 HD w/ 6.6L Duramax L5P—-2017-2019 GMC Sierra 2500 HD w/ 6.6L Duramax L5P–2017-2019 GMC Sierra 3500 HD w/ 6.6L Duramax L5P
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Height (in): 6.52
TechSpec Core Length (in): 24
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (1) Aluminum Intercooler Pipe w/ Bung–(1) Aluminum Intercooler Pipe–(3) Silicone Boots with DuraCore Technology–(6) Constant-Tension T-Bolt Clamps–Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: N/A
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A

Extended Information:

Emissions : EPA Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 24 x 18 x 10 inches
Weight: 26.02 PG