Promo!

HEDMAN HEDDERS 67-87 C10/C20 TRUCKS AND SUVS WITH BB CHEVY; STANDARD-DUTY, HTC SILVER CERAMIC COATED HEADERS; 2 IN. TUBE DIA.; 3 IN. COLL.; MID-LENGTH DESIGN

HEDMAN HEDDERS 67-87 C10/C20 TRUCKS AND SUVS WITH BB CHEVY; STANDARD-DUTY, HTC SILVER CERAMIC COATED HEADERS; 2 IN. TUBE DIA.; 3 IN. COLL.; MID-LENGTH DESIGN

HTC Polished Silver Ceramic Coated, Mid-Length Headers For 1967-87 CHEVY/GM C10/C20/C30/SUV with 396-502 BB Chevy (Centered Engine Chassis Only); 2 in. Mid-Length Tubes; 3 in. Ball/Socket Collector

Handcrafted, Mild Steel Construction.
The Mid-Length Tube Header Design Provides Significantly More Low and Mid-range Power than Cast Manifolds, and Provide Better Ground Clearance And Component Compatibility Than Long Tube Headers.
Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
Proud To Say, Made In The USA, Since 1954!

SKU FBLG-69196 Category Exhaust Header

Le prix initial était : $ 2,830.62.Le prix actuel est : $ 1,415.31.

Additional Attributes:

GTIN: 00732611691963
Air Conditioning: Yes
Automatic Transmission – Column: Yes
Automatic Transmission – Floor: Yes
Bolts/Studs Included: Yes
California Proposition 65: WARNING: Cancer & Reproductive Harm. For more info visit www.P65Warnings.ca.gov
Catalytic Converter(s) Included: No
Chassis Compatibility: NOT For Vehicles With Offset (right) Engine Position!
Clutch Notes: NOT For Use With factory Hydraulic Clutch/Slave Cylinder. Z-Bar Linkage OK
Collector Attachment: 3 in.
Collector Bolts Included: Yes
Collector Diameter: 3 in.
Collector Size: 3 in.
Collector Style: BALL and SOCKET Style (Gasketless)
Contents: headers, gaskets (when applicable), 3-bolt exhaust adapters, hardware
Crossover Pipe Included: No
Cylinder Head Port Shape: Round
Cylinder Head: Stock Profile Heads
E.O. #: No
Emissions Notes: Not Legal For Street Use on ’75-Later Model Years! Legal for off-road use only.
Engine Notes: Fits 396-502 BB Chevy Engines
Exhaust System Dia: 2-1/2 in.
Finish Type: HTC SILVER (polished) Ceramic-metallic Coating
Finish: HTC Polished Silver Ceramic-Metallic
Flange Style: Standard
Flange Thickness: 0.375 in.
Gasket Or Seal Included: Yes
Header Construction: MILD STEEL- Standard-Duty
Header Fasteners Included: Yes
Header Finish: HTC Polished Silver Ceramic-Metallic
Header Material: Mild Steel
Header Port Shape: Round
Header Style: Mid-Length Tube
IMPORTANT!: Vehicle must be setup as if came from the factory with a Big Block Chevy engine.
Installation Hardware Included: Yes
Installation Notes: Must Use Factory BB Chevy engine mounts and hardware. (112)
Manual Transmission – Column: Yes
Manual Transmission – Floor: Yes
Material: Mild Steel
Motor Mounts Included: No
Mounting Hardware Included: Yes
Package Contents: Headers, ball and socket reducers (exhaust adapters), gaskets, mounting hardware
Port Shape: Round
Power Steering: Yes
Primary Tube Diameter (in): 2 in.
Primary Tube Gauge: 16g
Quantity: Sold as a pair.
Reducer Outlet Size: 2-1/2 in.
Reducers Included: Yes
Replacement Gasket: 27540
Replacement Head Flange Gasket: 27540
Transmission Compatibility: Automatic Transmission
Transmission Notes: TAILSHAFT Style Crossmember Only. Not for Bellhousing Style Crossmember. (14)
Tube Design: Standard
Tube Diameter: 2 in.
Tube Length: Mid-Length Tubes
Tube Material Thickness: 16g
Tube Size: 2 in.
Tube Style: Mid-Length
Tuned: No
Weld-Up: No
with A.I.R. System: No
with EGR: No
Y-Pipe Included: No