Godzilla Stage 3 Hydraulic Roller

The Stage 3 cam is designed for crate engines and engine swaps into lighter cars or trucks for best overall performance. This cam will produce well over 600 horsepower on pump gas! Awesome power can be expected from 5,000 to 6,700 RPM with the valve spring kit (#7230GCS-KIT) and a phaser limiter (#5473). Testing with the 5473 phaser limiter kit resulted in nearly 100 HP and 25 lb-ft over stock. This much horsepower will make even Godzilla fly.

Additional Attributes:

GTIN: 00036584427551
Lifter Type: Hydraulic Roller
Grind Number: GLS295HR17
Exhaust Duration at .050 inch Lift: 250
Intake Duration at .050 Inch Lift: 237
Advertised Exhaust Duration: 308
Cam Type: Roller
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.671
Intake Centerline: 112
Intake Valve Lift with Factory Rocker Arm Ratio: 0.671
Intake Lobe Lift: 0.373
Exhaust Lobe Lift: 0.373
Lobe Separation: 117
Advance: 5
Advertised Intake Duration: 295
Basic Operating RPM Range: 2500-6700
California Proposition 65: Warning: Cancer and Reproductive Harm P65Warnings.ca.gov
Computer Controlled Compatible: Yes
Direct Injection Lobe Type: No
Engine Platform: 7.3L Godzilla
Exhaust Valve Lash: Hyd
Factory Rocker Ratio: 1.8
Fuel Management Strategy Compatible: No
Grind Number: GLS295HR17
Intake Valve Lash: Hyd
Phaser Requirement: Limited
Valve Springs Required: Yes
VVT Compatible: Yes

Extended Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 24.5 x 3 x 2.75 inches
Weight: 13.6 PG