Ford F-150 3.5L EcoBoost Intercooler Pipe Kit, 2011-2014

The Mishimoto 2011?2014 F?150 EcoBoost Intercooler Pipe kit is an ideal upgrade in reliability and performance. The Mishimoto kit features cold-side and hot-side piping in polished aluminum or wrinkle black. Accompanied by silicone couplers with DuraCore? technology, Mishimoto's F?150 EcoBoost intercooler piping is engineered to eliminate restrictive bends while improving durability and airflow. Compared to normal silicone, DuraCore? provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our couplers by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto Constant Tension T?bolt clamps for an accurate and secure installation. Upgrade to the Mishimoto 2011?2014 F?150 EcoBoost Intercooler Pipe Kit and give your truck the efficient, unimpeded airflow it needs to make up to 15 more horsepower and 21 Ft/lbs more torque. To further improve your charge?air system, pair this pipe kit with the Mishimoto 2011?2014 F?150 EcoBoost performance intercooler. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler pipe kit again.

Additional Attributes:

GTIN: 00748354036640
CARB EO Number: D-759-6
Install Difficulty: 4
OptionLabel: Polished
Prop 65 – Short Label: WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2011-2014 Ford F-150 3.5L EcoBoost
SellingPoint02: 2.5-in Aluminum hot-side intercooler pipes replace stock plastic pipes
SellingPoint03: 3-3.5-in Aluminum cold-side intercooler pipes replace stock plastic pipes
SellingPoint04: No trimming of the engine cover or modifications necessary for installation
SellingPoint05: Includes all boots necessary for easy installation, including couplers to the intercooler
SellingPoint06: Includes Mishimoto Silicone Boots with DuraCore technology for superior resistance to heat, pressure, fuel, and oil
SellingPoint07: Max gains of 15whp/21wtq when using our full kit
SellingPoint08: 10-percent greater flow than stock
SellingPoint09: 41-percent and 34-percent increase in internal volume for hot and cold-side pipes, respectively
SellingPoint10: CNC quick-disconnect for maximum durability, perfect fitment and ease of installation on stock or Mishimoto intercooler
SellingPoint11: Available in polished or wrinkle black powder-coated finish
SellingPoint12: Mishimoto Lifetime Warranty
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2011-2014 Ford F-150 3.5L V6 EcoBoost
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: P415
TechSpec Core Height (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: 3.5L V6 EcoBoost
TechSpec Includes: (1) Aluminum Intercooler Pipe w/ CNC Quick-Disconnect Flange–(1) Aluminum Intercooler Pipe w/ CNC IAT Sensor Housing–(3) Aluminum Intercooler Pipes–(7) Silicone Boots w/ DuraCore Technology–(2) High-Torque Worm Gear Clamps–(12) Constant-Tension T-Bolt Clamps–Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: N/A
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A

Extended Information:

Emissions : CARB Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 28 x 18 x 18 inches
Weight: 54.65 PG