Engine Camshaft and Lifter Kit

Edelbrock part #7194 Performer RPM Camshaft is designed for 1968 & Later Chrysler 383-400-440 V-8 applications. This Edelbrock cam kit produced 469 HP & 515 ft-lbs. of torque when used with #7193 intake and #60929 cylinder heads on a 440 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: – Duration @ .050 Intake: 238 degrees – Duration @ .050 Exhaust: 246 degrees – Lift @ Valve Intake: .480" – Lift @ Valve Exhaust: .495" – Lobe Separation: 110 Degrees – Intake Centerline: 105 Degrees – Idle Vacuum @ 1000 RPM's: 10"

Additional Attributes:

GTIN: 00085347071944
Advertised Exhaust Duration: 308
Advertised Intake Duration: 300
Cam Type: Cast
Computer Controlled Compatible: No
Exhaust Duration at .050 inch Lift: 246
Exhaust Valve Lift: 0.495
Grade Type: Performance
Intake Duration .050 Inch Lift: 238
Intake Valve Lift: 0.480
Lifter Materials: Hardened Steel
Lifter Type: Hydraulic
Lobe Separation: 110
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Extended Information:

Emissions : EPA Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 26.5 x 8 x 3.6 inches
Weight: 15.4 PG