Engine Camshaft and Lifter Kit

Edelbrock part #7122 Performer RPM Camshaft is designed for small-block Ford 289-302 V-8 applications. This Edelbrock cam kit produced 367 HP & 340 ft-lbs. of torque when used with #7121 intake and #60259 cylinder heads on a 302 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: – Duration @ .050 Intake: 224 degrees – Duration @ .050 Exhaust: 234 degrees – Lift @ Valve Intake: .496" – Lift @ Valve Exhaust: .520" – Lobe Separation: 112 Degrees – Intake Centerline: 107 Degrees – Idle Vacuum @ 1000 RPM's: 11"

Additional Attributes:

GTIN: 00085347071227
Advertised Exhaust Duration: 300
Advertised Intake Duration: 290
Cam Type: Cast
Computer Controlled Compatible: No
Exhaust Duration at .050 inch Lift: 234
Exhaust Valve Lift: 0.520
Grade Type: Performance
Intake Duration .050 Inch Lift: 224
Intake Valve Lift: 0.496
Lifter Materials: Hardened Steel
Lifter Type: Hydraulic
Lobe Separation: 112
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Extended Information:

Emissions : Available to Order
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 27 x 8 x 3.6 inches
Weight: 14.55 PG