Engine Camshaft

Edelbrock Rollin' Thunder Camshaft #3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. For use with OEM hydraulic roller lifters (use original lifters). Not for 1992-Later 4.3L balanced shaft engines. Requires aftermarket computer chip (not available from Edelbrock) for use with intake manifold #3713. Call Edelbrock Tech 800-416-8628 for info. Camshaft specifications: – Intake duration: 210 Degrees – Exhaust duration: 214 Degrees – Intake lift: .479" – Exhaust lift: .488" – Lobe separation: 112 Degree – Intake Center Line: 107 – Vacuum: 17"

Additional Attributes:

GTIN: 00085347037148
Advertised Exhaust Duration: 276
Advertised Intake Duration: 272
Cam Type: Roller
Computer Controlled Compatible: No
Exhaust Duration at .050 inch Lift: 214
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.488
Exhaust Valve Lift: 0.325
Intake Duration at .050 Inch Lift: 210
Intake Valve Lift with Factory Rocker Arm Ratio: 0.479
Intake Valve Lift: 0.319
Lifter Type: Roller
Lobe Separation: 112
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Extended Information:

Emissions : EPA Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 25.63 x 7.38 x 3.38 inches
Weight: 8.56 PG