Engine Camshaft

Edelbrock Rollin' Thunder Camshaft #2218 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 494HP and 439 Ft Lbs of Torque when paired with E-CNC 215 cylinder heads #79949. Must use a high stall torque converter only. Will not work with stock valve springs. Camshaft specifications: – Intake duration: 207 Degrees – Exhaust duration: 220 Degrees – Intake lift: .573" – Exhaust lift: .580" – Lobe separation: 118 Degree – Intake Center Line: 119.5 Degree – Vacuum: 16"

Additional Attributes:

GTIN: 00085347022182
Advertised Exhaust Duration: 220
Advertised Intake Duration: 207
Cam Type: Roller
Computer Controlled Compatible: Yes
Exhaust Duration at .050 inch Lift: 220
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.580
Exhaust Valve Lift: 0.341
Intake Duration at .050 Inch Lift: 207
Intake Valve Lift with Factory Rocker Arm Ratio: 0.573
Intake Valve Lift: 0.337
Lifter Type: Roller
Lobe Separation: 118
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Extended Information:

Emissions : EPA Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 24.5 x 2.75 x 2.75 inches
Weight: 10.35 PG