Engine Camshaft

Edelbrock Rollin' Thunder Camshaft #2215 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 430HP and 420 Ft Lbs of Torque when paired with Performer RPM Intake manifold #71187, Thunder Series AVS Carb #1813 and E-CNC 215 cylinder heads #79949. Use with high stall torque converter only. Camshaft specifications: – Intake duration: 220 Degrees – Exhaust duration: 220 Degrees – Intake lift: .510" – Exhaust lift: .510" – Lobe separation: 111 Degree – Intake Center Line: 108 Degree – Vacuum: 12"

Additional Attributes:

GTIN: 00085347022151
Advertised Exhaust Duration: 300
Advertised Intake Duration: 300
Cam Type: Roller
Computer Controlled Compatible: Yes
Exhaust Duration at .050 inch Lift: 220
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510
Exhaust Valve Lift: 0.300
Intake Duration at .050 Inch Lift: 220
Intake Valve Lift with Factory Rocker Arm Ratio: 0.510
Intake Valve Lift: 0.318
Lifter Type: Roller
Lobe Separation: 111
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Extended Information:

Emissions : EPA Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 24.5 x 2.75 x 2.75 inches
Weight: 10.6 PG