Engine Camshaft

The Edelbrock Rollin? Thunder Camshaft #2213 for 273-360 CID Chrysler small-block engines is a high-performance hydraulic roller cam for street or strip applications. With an RPM range of 2,500 to 6,200 RPM, this cam has been dyno-tested to deliver substantial gains at the 4,000 RPM mark. The #2213 Rollin? Thunder Camshaft produces a rough idle with an intake lift of .544 inch, exhaust lift of .541 inch, 286/294 degrees duration, 236/242 degrees duration at .050-inch lift, and a lobe separation angle of 110 degrees. We recommend our Performer RPM #60775 Cylinder Heads, #7177 RPM Air-Gap Intake Manifold and #1906 AVS2 Carburetor with this combination. Engine assembly lube included.

Additional Attributes:

GTIN: 00085347022137
Advertised Exhaust Duration: 294
Advertised Intake Duration: 286
Basic Operating RPM Range: 2500-6200
Cam Type: Hydraulic Roller
Computer Controlled Compatible: No
Exhaust Cam Lift at Lobe: 0.361
Exhaust Duration at .050 inch Lift: 242
Exhaust Timing at .050 inch Lift: Opens: 44.0 BBDC; Closes: 7.0 ATDC
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.541
Exhaust Valve Lift: 0.541
Intake Cam Lift at Lobe: 0.363
Intake Center Line: 106
Intake Duration at .050 Inch Lift: 236
Intake Timing at .050 inch Lift: Opens: 12.0 BTDC; Closes: 55.0 ABDC
Intake Valve Lift with Factory Rocker Arm Ratio: 0.544
Intake Valve Lift: 0.544
Lifter Type: Hydraulic Roller
Lobe Separation: 110
Quantity: Sold Individually
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Extended Information:

Emissions : EPA Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 24.5 x 2.75 x 2.75 inches
Weight: 11.6 PG