DEI 906644 Vapor Block(TM) Fuel Line Sleeve – 0.375″ (10mm) I.D. x 12″

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 – 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 – 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length DO NOT apply directly to exhaust components.

Additional Attributes:

GTIN: 00607078066442
Material: Aluminum over glass fiber scrim.
Length: 12
Color: Aluminum
Maximum Hose Diameter: .375
Maximum Hose Diameter: 10
Indicator Markings: No
Indicator Markings Color: N/A
Includes: One 12 inch length of Vapor Block, for lines approximately 3/8 inch in diameter.
Prop 65 – Long label: WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Prop 65 – Short label: WARNING: Cancer and Reproductive Harm – www.p65warnings.cs.gov
Prop 65 Yes/No: Yes

Extended Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 10 x 3.75 x 2.5 inches
Weight: 0.3 PG

PDF:

INS – Warranty