Camburg Engineering 2WD/4WD 1996-2002 Toyota 4Runner King 2.5 Lift Kit CAM-310146-U

Our King 2.5 Performance kit for the Toyota 4-Runner takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks. With the upper arms these shocks increase wheel travel. Improved ride both on and off-road Eliminates weak upper ball-joint Increased wheel travel Corrected suspension geometry Made in the USA After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our uniball upper arms address these issues and more.  Replacing the stock ball-joint with a uni-ball bearing, we can increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation. These are designed to be used with stock coil springs or our Camburg springs for maximum useable wheel travel and performance. 0-3" lift (front) Improved ride and handling Easy bolt-on installation Made in the USA.

Additional Attributes:

GTIN: 00888563194752
Spring Material: Spring Steel
Bushings Included: Yes
Mounting Hardware Included: Yes
Spring Color: Blue
Shocks Included: Yes
Grade Type: Performance
Maximum Lift: 3
Coil Spring End 1 Type: Open
Coil Spring End 2 Type: Open
Coils Quantity Front: 2
Strut(s) Included: Yes
Bushing Color: Black
Coil Spring Color: Blue
Coil Spring Material: Spring Steel
Control Arm Color: Black
Control Arm Type: Tubular
Dust Cover Caps Included: No
Front Shock Type: 2.5
Front Springs Included: Yes
Hardware Included: Yes
Joint Type: Uniball
Lift: 3
Load Rate: N/A
Prop 65 Y/N: No
Rear Shock Type: 2.5
Rear Shocks Included: Yes
Rear Springs Included: No
Shock Brand: King
Shock Type: 2.5 Performance
Spring Load: N/A
Spring Rate: N/A

Extended Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1.0
Package UOM: EA
Weight:

PDF:

CAM-310005