Baffled Oil Catch Can fits Infiniti Q50/Q60 3.0T 2016-2024

Infiniti is no stranger to the luxury sedan segment, taking on the likes of BMW, Mercedes, and Audi. The introduction of their VR30DDTT made the 2016-2024 Q50 and Q60 into a rocket ship and blasted the manufacturer into the stratosphere alongside the typical posh sedans. Luxury is all about the ability to perform, which is where even the most advanced internal combustion engines still suffer. Luckily, we're here to keep the blow-by off those intake valves with the 2016-2024 Infiniti Q50/Q60 3.0T Direct-Fit Catch Can Kit. The powerhouse 3.0T equipped in these Infinitis is the prime breeding ground for blow-by and carbon buildup. With the already high compression ratio, combined with a turbo for each bank and a direct injection fueling system, oil and fuel particles have free range to gum up the intake manifold and valves, ultimately diminishing the performance and luxury of your Q50 or Q60. Nestled in the tight engine bay, our 2-port compact catch can design is installed in line with the VR30DDTT's PCV system to intercept and trap oil and fuel particles from the crankcase before they have a chance to take up residence on the top end components. Our robust mounting bracket places the catch can in an easily accessible location and includes a slotted mounting screw design to take the hassle out of servicing the can. To back up Mishimoto's superior craftsmanship, each 2016-2024 Q50/Q60 catch can kit comes with the renowned Mishimoto Lifetime Warranty!

Additional Attributes:

GTIN: 00811580034756
Install Difficulty: 2
Prop 65 – Short Label: WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2016-2024 Infiniti Q50/Q60 3.0T
SellingPoint02: Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter
SellingPoint03: Helps reduce carbon buildup on intake valves
SellingPoint04: Patented (US D884,760 S) billet 6061 aluminum can sealed with Viton O-rings
SellingPoint05: Installs in under 30 minutes
SellingPoint06: Robust, application-specific bracket mounts the can in a serviceable location
SellingPoint07: Includes pre-molded hoses for simplified installation
SellingPoint08: Slotted mounting holes for easier accessibility and servicing
SellingPoint09: Defends intake system and essential components from oil blow-by
SellingPoint10: CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can
SellingPoint11: Catch can has a 3 oz. capacity for longer servicing intervals
SellingPoint12: Internal air diverter increases air turbulence to improve oil separation
SellingPoint13: Helps maintain proper octane levels to reduce potential detonation
SellingPoint14: Filter and can are fully serviceable
SellingPoint15: Mishimoto Lifetime Warranty
TechSpec Applications: 2016-2024 Infiniti Q50 3.0T–2016-2022 Infiniti Q60 3.0T
TechSpec Catch Can Diameter (in): N/A
TechSpec Chassis Codes: N/A
TechSpec Drain Plug Thread Size: N/A
TechSpec Engine Codes: VR30DDTT
TechSpec Height (in): N/A
TechSpec Includes: N/A
TechSpec Inlet: N/A
TechSpec Installation Notes: N/A
TechSpec Material: N/A
TechSpec Note: This kit will not fit with some aftermarket strut tower bars–After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.
TechSpec Outlet: N/A

Extended Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 14 x 10 x 8 inches
Weight: 6.75 PG