Heat Reflective Tape

One sheet of dimpled aluminum, sized 42 inch by 48 inch.

• Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
• Just Trim Peel And Stick
• Blocks Radiant Heat From Entering Driver Compartment
• Withstands Direct High Temperatures Up To 1750Degrees
• Serves As A Barrier To Unwanted Road/Tire And Engine Noise
• Constructed From 10 Mil Aluminum
• Easy To Form To Shapes And Contours
• Aggressive Self-Adhesive Backing Holds Past 450Degrees F
• Adheres To Almost Any Surface/Material/Fiberglass
• Minimum Clearance Required Only 3/16 in. Thick

One 30 foot roll of 1-1/2 inch wide Tan EXO exhaust wrap.

• Superior Abrasion Protection Built To Handle Extreme Off-Road Use
• Dual-Layer Design Hi-Temp Fiberglass With 304 Stainless Steel
• Interlocking Mesh Makes Installation Much Easier
• Pre-Wetting Roll Not Necessary For Wrapping

A kit consisting of six Heat Shroud covers, a custom cut fuel rail cover, a manifold shield, and twelve Viton O-rings.

• 6 - Fuel Injector Covers
• 12 - OE Replacement Fuel Injector O-Rings
• 1 - Fuel Rail Heat Cover
• 1 - Intake Manifold Heat Shield
• Detailed Instructions
• Reduces Fuel Rail/Injector Fuel Temps
• Reduces Chance Of Vapor Lock
• Protects Injectors/Fuel Rail From Engine Heat

One 1-1/2 inch by 30 foot roll of Reflect-A-Gold.

• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Handles Continuous Temps Up To 800 Degrees F
• Resists UV Degradation For Long-Term Performance
• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• Virtually NO Clearance Needed
• Light Weight And Flexible-Trim To Size
• 0.0065 in. Thick
• Easy To Apply- Wont Lift Off

One 2 inch by 15 foot roll of Reflect-A-Gold.

• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Handles Continuous Temps Up To 800 Degrees F
• Resists UV Degradation For Long-Term Performance
• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• Virtually NO Clearance Needed
• Light Weight And Flexible-Trim To Size
• 0.0065 in. Thick
• Easy To Apply- Wont Lift Off

One 108 inch length of silver Cool Tube Extreme with a 1/2 inch inside diameter.

• No Need To Remove Wires/Cables Or Hoses/Can Be Slit Lengthwise
• Reflects 750 Degrees F Direct Continuous Heat
• Easily Trim To Length
• Tough/Durable With An Easy To Clean Finish
• 1/2 in x 9 ft
• Silver

One 36 inch length of silver Cool Tube Extreme with a 1-1/2 inch inside diameter.

• No Need To Remove Wires/Cables Or Hoses/Can Be Slit Lengthwise
• Reflects 750 Degrees F Direct Continuous Heat
• Easily Trim To Length
• Tough/Durable With An Easy To Clean Finish
• 1-1/2 in x 3 ft
• Silver

One 108 inch length of black Cool Tube Extreme with a 1/2 inch inside diameter.

• No Need To Remove Wires/Cables Or Hoses/Can Be Slit Lengthwise
• Reflects 750 Degrees F Direct Continuous Heat
• Easily Trim To Length
• Tough/Durable With An Easy To Clean Finish
• 1/2 in x 9 ft
• Black

One 36 inch length of black Cool Tube Extreme with a 1 inch inside diameter.

• No Need To Remove Wires/Cables Or Hoses/Can Be Slit Lengthwise
• Reflects 750 Degrees F Direct Continuous Heat
• Easily Trim To Length
• Tough/Durable With An Easy To Clean Finish
• 1 in x 3 ft
• Black

One 108 inch length of black Cool Tube Extreme with a 3/4 inch inside diameter.

• No Need To Remove Wires/Cables Or Hoses/Can Be Slit Lengthwise
• Reflects 750 Degrees F Direct Continuous Heat
• Easily Trim To Length
• Tough/Durable With An Easy To Clean Finish
• 3/4 in x 9 ft
• Black

One 24 inch by 150 foot roll of Reflect-A-Gold.

• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Handles Continuous Temps Up To 800 Degrees F
• Resists UV Degradation For Long-Term Performance
• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• Virtually NO Clearance Needed
• Light Weight And Flexible-Trim To Size
• 0.0065 in. Thick
• Easy To Apply- Wont Lift Off

One T25/T28 size turbo shield, plus a 15 foot length of exhaust wrap, two 20 inch locking ties, and a 5 foot length of stainless wire.

• Riveted anchors incorporated to secure shield.
• Ultimate thermal barrier reduces turbo lag.
• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Glass fiber with stranded stainless inner layer.
• Barrier layer of fine stainless mesh.

One T4 size turbo shield and one 5 foot length of 22 gauge stainless steel wire.

• Riveted anchors incorporated to secure shield.
• Ultimate thermal barrier reduces turbo lag.
• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Glass fiber with stranded stainless inner layer.
• Barrier layer of fine stainless mesh.

One 4 inch by 12 inch Titanium pipe shield plus three stainless steel hose clamps.

• Capable Of Handling High Temperature Exposure Up To 1350 Degrees F
• 4 in. x 12 in.
• Protects Heat Sensitive Components/Hoses/Lines And Wiring
• Easy To Install With Standoff Brackets And Pipe Clamps
• Reduces Heat From Entering Vehicle When Placed On Exhaust Pipes
• Simple To Re-Position
• Includes 3.5 in. Clamps For Pipe Diameters Up To 3 in.
• LR Fiber Technology Is A Two-Ply Material.
• Outer Layer - Woven Basalt For Durability And Strength
• Inside Material - High Temp Silica Fabric

One reflective mylar fuel can cover.

• Easy On And Off
• Reduces Fuel Temperatures Up To 23 Percent
• Has Cut Outs For Fill/Vent And Handle
• Recommended By Race Fuel Manufacturers

One reflective mylar fuel can cover.

• Custom Fit For 11 Gallon Quick Fill Dump Cans
• Easy On And Off
• Reduces Fuel Temperatures Up To 23 Percent
• Has Cut Outs For Fill/Vent And Handle
• Keeps Race Fuel Cool
• Recommended By Race Fuel Manufacturers