Spark Plug Boot Heat Sleeve

Two 8 inch Titanium Protect-A-Boots.

• Ultimate Protection For Spark Plug Boots And Wires
• Withstands Heat Up To 1800 Degrees F /983 Degrees C
• Universal Fit For Most Straight Or Angled Boot
• Strong/Durable And Long Lasting Construction
• Resistant To Most Abrasions/Chemical And Contaminants
• Cool Carbon Fiber Look
• Reinforcement Ring For Easy Plug Removal During Maintenance
• Extra Large 8 in. Boots
• 2 Boots Per Pack

Eight 6 inch Titanium Protect-A-Boots with internal metal ring.

• Ultimate Protection For Spark Plug Boots And Wires
• Withstands Heat Up To 1800 Degrees F /983 Degrees C
• Universal Fit For Most Straight Or Angled Boot
• Strong/Durable And Long Lasting Construction
• Resistant To Most Abrasions/Chemical And Contaminants
• Cool Carbon Fiber Look
• Reinforcement Ring For Easy Plug Removal During Maintenance
• 6 in. Boots
• 8 Boots Per Pack

Black silicone covered braided glass fiber sleeving with a 3/8 inch inside diameter. Sold by linear foot.

• Bulk By The Foot
• 3/8 in. I.D.

Two orange 6 inch Protect-A-Boots with internal metal ring.

• Withstands 1200 Degrees F Direct Continuous Heat
• Helps Prevent Burn-Through-Hardening And Cracking Of Boots
• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• Double-Wall Construction For Added Durability
• Non-Flammable/Protects Against Chemicals/Resists Water
• Reinforcement Ring For Easy Plug Removal During Maintenance
• 2 Boots Per Pack

One 13.3 oz pressurized metal can of adhesive spray.

• Fast drying, high tack spray adhesive
• Great for gluing a wide range of materials to metal, wood, plastic, and foam
• Heat resistant up to 200°F/94°C
• High strength, long-term bond
• Environmentally safe. No ozone depleting substances used
• CA compliant low VOC SCAQMD Rule 1168
• 13.3 oz. spray can

One 7 foot length of silver Protect-A-Wire with a 5/16 inch inside diameter and six 1-1/2 inch long heat shrink tube pieces.

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Cable/Hoses
• Includes DEI Hi-Temp Shrink Tubes
• Four Vivid Colors Silver/Black/Red And Blue
• Available In 2 And 8 Cylinder Kits

One 13 foot length of black Protect-A-Wire with a 5/16 inch inside diameter, four 6 inch black Protect-A-Boots with internal metal ring, and twelve 1-1/2 inch long heat shrink tube pieces.

• 13 Feet Of Protect-A-Wire Line Sleeving
• 12 Hi-Temp Shrink Tubes
• 4 Protect-A-Boots

Two silver 6 inch Protect-A-Boot Sleeves.

• Universal-Fits Multiple Angled Spark Plug Boots
• 1 1/4 in. I.D. At Both Ends
• Withstands Up To 1200Degrees F Of Direct Heat
• Glass Fiber Double-Wall Construction
• Fits Nearly Every Type Of Boot

One 13 foot length of Titanium Protect-A-Wire with a 1/2 inch inside diameter, four 6 inch Titanium Protect-A-Boots with internal metal ring, and twelve 1-1/2 inch long heat shrink tube pieces.

• 13 Feet Of Protect-A-Wire Line Sleeving
• 12 Hi-Temp Shrink Tubes
• 4 Protect-A-Boots

One 13 foot length of Titanium Protect-A-Wire with a 1/2 inch inside diameter, four 6 inch Protect-A-Boots with internal metal ring, and twelve 1-1/2 inch long heat shrink tube pieces.

• Constructed From High Temp Basalt Material
• Withstands 500 Degrees F Continuous 1800 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Hoses/13mm Diameter
• Includes DEI Hi-Temp Shrink Tubes
• 5 Vivid Colors/Silver/Black/Red/Blue And Silver
• 13mm I.D.
• 4 Cylinder Kit - 13 Feet Of Sleeving/12 Hi-Temp Boot Shrink Tube

One 18 inch length of silicone covered braided glass fiber sleeving with a 3/8 inch inside diameter and 4 red heat shrink sleeves.

• Meets USAC Requirements For Fireproof Fuel Line Cover
• Rated To A Max Temperature Of 520 Degrees F For 136 Hours
• Includes 1.5 ft Of 3/8 in. ID Silicone Covered Glass Braided Sleeving
• Includes Four 18 mm Heat Shrink Ends

One 13 foot length of red Protect-A-Wire with a 5/16 inch inside diameter, four 6 inch red Protect-A-Boots with internal metal ring, and twelve 1-1/2 inch long heat shrink tube pieces.

• 13 Feet Of Protect-A-Wire Line Sleeving
• 12 Hi-Temp Shrink Tubes
• 4 Protect-A-Boots

One 25 foot length of silver Protect-A-Wire with a 5/16 inch inside diameter and twenty-five 1-1/2 inch long heat shrink tube pieces.

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Cable/Hoses
• Includes DEI Hi-Temp Shrink Tubes
• Four Vivid Colors Silver/Black/Red And Blue
• Available In 2 And 8 Cylinder Kits

One 11 foot long Tig Torch Cable cover for lines approximately 3/4 inch in diameter.

• SAE ARP 1536 A Rated
• ISO 6722 Abrasion Rating
• SAE J 369 Flammability Rating Of Self Extinguishing
• 3/4 in. Inside Diameter With 30 Percent Overlap
• Includes 100 Percent Silicone End Sealing Tape
• 11 Foot Overall Length

Eight silver 6 inch Protect-A-Boot Sleeves.

• Universal-Fits Multiple Angled Spark Plug Boots
• 1 1/4 in. I.D. At Both Ends
• Withstands Up To 1200Degrees F Of Direct Heat
• Glass Fiber Double-Wall Construction
• Fits Nearly Every Type Of Boot

Eight 8 inch Titanium Protect-A-Boots.

• Ultimate Protection For Spark Plug Boots And Wires
• Withstands Heat Up To 1800 Degrees F /983 Degrees C
• Universal Fit For Most Straight Or Angled Boot
• Strong/Durable And Long Lasting Construction
• Resistant To Most Abrasions/Chemical And Contaminants
• Cool Carbon Fiber Look
• Reinforcement Ring For Easy Plug Removal During Maintenance
• Extra Large 8 in. Boots
• 8 Boots Per Pack