Spark Plug Boot Heat Sleeve

One Speed Sleeve, eight stainless steel locking ties, and forty steel clips.

• Serves As An Insulator And Radiant Heat Barrier
• Quick And Simple Installation
• Supplied Wrap Covers Pipes Up To 2-1/2 in. Diameter
• Includes 8 In. Wide Exhaust Wrap/Lock Fasteners And Locking Ties
• 12 Ft. Of 8 In. Wrap For 4 And 6 Cylinder

(Available While Supplies Last)

• Reduce Under Hood Temperatures a Realistic 50 Percent
• Decreases Exhaust Density And Increases Exhaust Flow
• Improves Horsepower
• Withstands 1200 Degrees F Direct/2000 Degrees F Radiant
• Added Durability And Heat Retention
• Only Exhaust Wrap With Installation Guide Lines

One Speed Sleeve, eight stainless steel locking ties, and fifty steel clips.

• Serves As An Insulator And Radiant Heat Barrier
• Quick And Simple Installation
• Supplied Wrap Covers Pipes Up To 2-1/2 in. Diameter
• Includes 8 In. Wide Exhaust Wrap/Lock Fasteners And Locking Ties
• 16 Ft. Of 8 In. Wrap For 8 Cylinder

Two blue 6 inch Protect-A-Boots with internal metal ring.

• Withstands 1200 Degrees F Direct Continuous Heat
• Helps Prevent Burn-Trough/Hardening/Cracking Of Boots
• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• Double-Wall Construction For Added Durability
• Non Flammable/Protects Against Chemicals/Resists Water
• Reinforcement Ring For Easy Plug Removal During Maintenance
• 2 Boots Per Pack

One 28 inch long Cool Cover GOLD.

• Fits Up To 4 in. Diameter Tubing
• Reflects Heat Up To 800 Degrees F
• 21Oz Heat Treated Weave Lock Glass Fiber
• Tested To FSTM 191.5100 Standards
• Tested To ASTM D1117 Standards
• Promotes Cooler Air Charge For Added Power
• Installs And Removes In Seconds For Show Or Go
• Measures 4 in. O.D. X 28 in. L
• Hook And Loop Fastening System For Easy Installation

One 13 foot length of blue Protect-A-Wire with a 5/16 inch inside diameter and twelve 1-1/2 inch long heat shrink tube pieces.

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Hoses/10mm Diameter
• Includes DEI Hi-Temp Shrink Tubes
• Four Vivid Colors/Silver/Black/Red And Blue
• 8mm I.D.
• 4 Cylinder Kit - 25 Feet Of Sleeving/25 Hi-Temp Boot Shrink Tube

Eight blue 6 inch Protect-A-Boots with internal metal ring.

• Withstands 1200 Degrees F Direct Continuous Heat
• Helps Prevent Burn-Trough/Hardening/Cracking Of Boots
• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• Double-Wall Construction For Added Durability
• Non Flammable/Protects Against Chemicals/Resists Water
• Reinforcement Ring For Easy Plug Removal During Maintenance
• 8 Boots Per Pack

Eight silver 8 inch Protect-A-Boots.

• Withstands 1200 Degrees F Direct Continuous Heat
• Helps Prevent Burn-Through/Hardening And Cracking Of Boots
• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• Double-Wall Construction For Added Durability
• Non Flammable/Protects Against Chemicals/Resists Water
• Extra Large 8 in. Boots
• Reinforcement Ring For Easy Plug Removal During Maintenance
• 8 Boots Per Pack

Two silver 6 inch Protect-A-Boots with internal metal ring.

• Withstands 1200 Degrees F Direct Continuous Heat
• Helps Prevent Burn-Through/Hardening And Cracking Of Boots
• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• Double-Wall Construction For Added Durability
• Non Flammable/Protects Against Chemicals/Resists Water
• Reinforcement Ring For Easy Plug Removal During Maintenance
• 2 Boots Per Pack

Eight black 6 inch Protect-A-Boots with internal metal ring.

• Withstands 1200 Degrees F Direct Continuous Heat
• Helps Prevent Burn-Through/Hardening And Cracking Of Boots
• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• Double-Wall Construction For Added Durability
• Non Flammable/Protects Against Chemicals/Resists Water
• Reinforcement Ring For Easy Plug Removal During Maintenance

Six 8 inch Titanium Protect-A-Boots.

• Ultimate Protection For Spark Plug Boots And Wires
• Withstands Heat Up To 1800 Degrees F /983 Degrees C
• Universal Fit For Most Straight Or Angled Boot
• Strong/Durable And Long Lasting Construction
• Resistant To Most Abrasions/Chemical And Contaminants
• Cool Carbon Fiber Look
• Perfect For Ls Motors
• Extra Large 8 in. Boots
• No Restricting Steel Ring

Two 6 inch Titanium Protect-A-Boots with internal metal ring.

• Ultimate Protection For Spark Plug Boots And Wires
• Withstands Heat Up To 1800 Degrees F /983 Degrees C
• Universal Fit For Most Straight Or Angled Boot
• Strong/Durable And Long Lasting Construction
• Resistant To Most Abrasions/Chemical And Contaminants
• Cool Carbon Fiber Look
• Reinforcement Ring For Easy Plug Removal During Maintenance
• 6 in. Boots
• 2 Boots Per Pack

One 12 inch by 24 inch sheet of Reflect-A-Cool.

• Radiant Heat Protection Up To 2000 Degrees F
• Self-Adhesive Backing With Release Liner For Easy Installation
• Moisture And Solvent Resistant
• Virtually NO Clearance Needed
• Light Weight And Flexible-Trim To Size
• 0.0065 in. Thick
• Easy To Apply- Wont Lift Off
• 12 in. x 24 in. sheet

One 13 foot length of silver Protect-A-Wire with a 5/16 inch inside diameter and twelve 1-1/2 inch long heat shrink tube pieces.

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Hoses/10mm Diameter
• Includes DEI Hi-Temp Shrink Tubes
• Four Vivid Colors/Silver/Black/Red And Blue
• 8mm I.D.
• 4 Cylinder Kit - 25 Feet Of Sleeving/25 Hi-Temp Boot Shrink Tube

Eight silver 6 inch Protect-A-Boots with internal metal ring.

• Withstands 1200 Degrees F Direct Continuous Heat
• Helps Prevent Burn-Through/Hardening And Cracking Of Boots
• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• Double-Wall Construction For Added Durability
• Non Flammable/Protects Against Chemicals/Resists Water
• Reinforcement Ring For Easy Plug Removal During Maintenance
• 8 Boots Per Pack

Eight orange 6 inch Protect-A-Boots with internal metal ring.

• Withstands 1200 Degrees F Direct Continuous Heat
• Helps Prevent Burn-Through-Hardening And Cracking Of Boots
• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• Double-Wall Construction For Added Durability
• Non-Flammable/Protects Against Chemicals/Resists Water
• Reinforcement Ring For Easy Plug Removal During Maintenance
• 8 Boots Per Pack