Hose Cover

One 36 inch length of Vapor Block with a 3/8 inch inside diameter.

• Split Design With Built In Adhesive Flap
• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• Can Be Used On Any Cable/Hose Or Line For Added Heat Protection
• 3/8 in. -10 mm I.D. X 36 in

One blanket.

• Safety Cover for EV LiPo battery fires.
• Thermal-resistant fabric can withstand heat up to 2700F, providing a critical shield in the event of a battery malfunction.
• Creates a protective barrier between driver & fire. No burn-through for up to 30minutes.
• Can be used as a protective layer between LiPo battery storage compartment and the rest of the vehicle.
• EV Fire Blanket material is also sold separately and in custom cut lengths.

One 7 foot length of blue Protect-A-Wire with a 5/16 inch inside diameter, two 6 inch blue Protect-A-Boots with internal metal ring, and six 1-1/2 inch long heat shrink tube pieces.

• 7 Feet Of Protect-A-Wire Sleeving
• 6 Hi-Temp Shrink Tubes
• 2 Protect-A-Boots
• Available In 5 Colors

One 50 foot roll of Heat Shroud with a 1/2 inch to 1-1/4 inch inside diameter.

• Versatility Of Fitting Diameters 1/2 in. To 1 1/4 in.
• Convenient Hook/Loop Designed Edges
• Withstands 500Degrees F Continuous/2000Degrees F Radiant Heat
• No Need To Remove Wires And Hoses
• Easily Trimmed To Length
• Fireproof

One brass purge plug, sized 1/8 inch, with NPT thread.

• Solid brass fitting.

One 200 foot roll of 12mm shrink tubing.

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

One 50 foot roll of Fire Sleeve with a 1 inch inside diameter.

• Fire Tape Not Included
• Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
• Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
• Burn Protection During Under Hood Repairs And Maintenance
• Use For Bundling And Protecting Hoses
• Electrical Wiring Etc.