Exhaust Heat Shield

One T4 size turbo shield, plus a 15 foot length of exhaust wrap, two 20 inch locking ties, and a 5 foot length of stainless wire.

• Riveted anchors incorporated to secure shield
• Ultimate thermal barrier reduces turbo lag
• Silicone coated Onyx Black outer shell
• Silica inner insulation layer
• Glass fiber with stranded stainless inner layer
• Barrier layer of fine stainless mesh

One 36 inch length of Heat Sheath with a 1-1/4 inch inside diameter.

• Capable Of Withstanding 500 Degrees F Direct/2000 Degrees F Radiant Heat
• Pliable For Tight Bends
• Trim To Desired Length

One 12 inch by 24 inch sheet of Reflect-A-Gold.

• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Handles Continuous Temps Up To 800 Degrees F
• Resists UV Degradation For Long-Term Performance
• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• Virtually NO Clearance Needed
• Light Weight And Flexible-Trim To Size
• 0.0065 in. Thick
• Easy To Apply- Wont Lift Off

One T6X size turbo shield, plus a 15 foot length of exhaust wrap, two 20 inch locking ties, and a 5 foot length of stainless wire.

• Riveted anchors incorporated to secure shield.
• Ultimate thermal barrier reduces turbo lag.
• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Glass fiber with stranded stainless inner layer.
• Barrier layer of fine stainless mesh.

One 36 inch length of Heat Sheath with a 1-1/2 inch inside diameter.

• Capable Of Withstanding 500 Degrees F Direct/2000 Degrees F Radiant Heat
• Pliable For Tight Bends
• Trim To Desired Length

One 1-1/2 inch by 15 foot roll of Reflect-A-Gold.

• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Handles Continuous Temps Up To 800 Degrees F
• Resists UV Degradation For Long-Term Performance
• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• Virtually NO Clearance Needed
• Light Weight And Flexible-Trim To Size
• 0.0065 in. Thick
• Easy To Apply- Wont Lift Off

One 36 inch length of Heat Shroud with a 1/2 to 1-1/2 inch inside diameter.

• No Need To Remove Wires And Hoses
• Convenient Hook/Loop Closure Design
• Withstands 500 Degrees F Direct Continuous/2000 Degrees F Radiant Heat
• Reflects 90 Percent Of Radiant Heat
• Easily Trim To Length
• Fireproof
• 1 in. X 3 ft.

One T6 size turbo shield, plus a 15 foot length of exhaust wrap, two 20 inch locking ties, and a 5 foot length of stainless wire.

• Riveted anchors incorporated to secure shield.
• Ultimate thermal barrier reduces turbo lag.
• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Glass fiber with stranded stainless inner layer.
• Barrier layer of fine stainless mesh.

Four 6 inch lengths of aluminized sleeving with a 3/4 inch inside diameter.

• Protection For Electrical Wires/Hoses/Cables And More
• Capable Of Withstanding 2000 Degrees F Of Radiant Heat
• Inexpensive Alternative For Protecting Ignition Wires And Boots
• Easy To Install
• 3/4 in. Diameter x 6 in. Long
• Sold In Packs Of 4

Aluminized

• Reflects Radiant Heat
• Reduce Fuel Temperature
• Lower Stress On Fuel Pump
• Reflect-A-Cool Withstands Temperatures Up To 400 Degrees F
• Includes Reflective Tape To Help Cover Seems And Irregular Shapes
• Includes 24 in. x 24 in. Reflective Sheet And 1.5 in. X 15 ft. Reflective Tape

One 36 inch length of black Cool Tube Extreme with a 1-1/2 inch inside diameter.

• No Need To Remove Wires/Cables Or Hoses/Can Be Slit Lengthwise
• Reflects 750 Degrees F Direct Continuous Heat
• Easily Trim To Length
• Tough/Durable With An Easy To Clean Finish
• 1-1/2 in x 3 ft
• Black

One reflective mylar tank cover.

• Race Fuel Manufacturers Recommend Keeping Fuel Cool
• Maintain Stable Fuel Temperatures Between Sessions
• Made From 2 mm Felt Backed Mylar
• Fast On And Off With Easy To Secure Draw String
• Reflects Up To 90 Percent Of Heat From The Sun

One 1-1/2 inch by 15 foot roll of Cool Tape.

• Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
• Flexible And Easy To Apply
• Strong Self-Adhesive Backing
• Use To Secure Panels/Seal Air Boxes/Wrap Wiring/More

One 36 inch by 48 inch sheet of Reflect-A-Cool.

• ProtProtect Wires/Cables/Hoses/Pipes/Tubing From Radiant Heatect Wires/Cables/Hoses/Pipes And Tubing From Radiant Heat
• Radiant Heat Protection Up To 2000 Degrees F
• Self-Adhesive Backing With Release Liner For Easy Installation
• Moisture And Solvent Resistant
• Virtually NO Clearance Needed
• Light Weight And Flexible-Trim To Size
• 0.0065 in. Thick
• 36 in. X 48 in. Sheet

One T22 size turbo shield and one 5 foot length of 22 gauge stainless steel wire.

• Riveted anchors incorporated to secure shield.
• Ultimate thermal barrier reduces turbo lag.
• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Glass fiber with stranded stainless inner layer.
• Barrier layer of fine stainless mesh.

One T22 size turbo shield, plus a 15 foot length of exhaust wrap, two 20 inch locking ties, and a 5 foot length of stainless wire.

• Riveted anchors incorporated to secure shield.
• Ultimate thermal barrier reduces turbo lag.
• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Glass fiber with stranded stainless inner layer.
• Barrier layer of fine stainless mesh.