Exhaust Heat Shield

One 100 foot roll of 1 inch wide titanium exhaust wrap.

• Withstands 1800 Degrees F Direct/2500 Degrees F Intermittent Heat
• Promotes Increased Flow For Improved Performance
• Reduces Temperature/Vibration Breakdown
• Extremely Pliable For A Tight And Secure Wrap
• Hi-Tech Carbon Fiber Look
• Pre-Wetting Roll Not Necessary For Wrapping
• DEI HT Silicone Coating Not Required

Six 1/2 inch tall stainless steel standoffs with stainless hardware.

• 1/2 in. Tall Stainless Standoffs
• Includes Mounting Hardware
• Includes 6 Stainless Standoff Brackets

Ten 20 inch long stainless steel locking ties.

• Constructed Of High Grade 304 Stainless Steel
• Capable Of Withstanding Heat In Excess Of 2500 Degrees F
• Strong 100 lb. Tensile Strength

One wide-band stainless steel pipe clamp. Inside diameter ranges from 1-7/8 inch to 2-3/16 inch.

• Can Be Polished To A Show Finish
• Great As An Exhaust Clamp
• Provides A Clean Transition From Wrap To Pipe
• Clamp Has A Range Of 2.25 in To 2.56 in.

One T6 size turbo shield and one 5 foot length of 22 gauge stainless steel wire.

• Riveted Anchors Incorporated To Secure Shield
• Custom Fit For Easy Install
• Ultimate Thermal Barrier Reduces Turbo Lag
• Outer Shell Made With Our Titanium Material Coated In Silicone
• Thick Insulation Layer Made From Silica To Contain Turbo Heat
• New Inner Layer Made From Glass Fiber And Stainless Steel Thread
• Final Barrier Layer Of A Fine Stainless Steel Mesh

Four 40 inch long stainless steel locking ties. Width 12mm.

• Made From 316 Stainless Steel
• Tensile Strength- 5/16 in. 200 Lbs./1/2 in. 350 Lbs.
• Capable Of Withstanding Temperatures In Excess Of 2500 Degrees F
• 4 - 12mm/1/2 in. X 40 in.

One T6 size turbo shield, plus a 15 foot length of exhaust wrap, two 20 inch locking ties, and a 5 foot length of stainless wire.

• Riveted Anchors Incorporated To Secure Shield
• Custom Fit For Easy Install
• Ultimate Thermal Barrier Reduces Turbo Lag
• Outer Shell Made With Our Titanium Material Coated In Silicone
• Thick Insulation Layer Made From Silica To Contain Turbo Heat
• New Inner Layer Made From Glass Fiber And Stainless Steel Thread
• Final Barrier Layer Of A Fine Stainless Steel Mesh

One T25/T28 size turbo shield.

• Riveted Anchors Incorporated To Secure Shield
• Custom Fit For Easy Install
• Ultimate Thermal Barrier Reduces Turbo Lag
• Outer Shell Made With Our Titanium Material Coated In Silicone
• Thick Insulation Layer Made From Silica To Contain Turbo Heat
• New Inner Layer Made From Glass Fiber And Stainless Steel Thread
• Final Barrier Layer Of A Fine Stainless Steel Mesh

One 15 foot length of Ultra 47 sheath with a 1/2 inch inside diameter.

• Easy To Cut/Trim To Length
• Ultra Lightweight- 40 Percent Lighter Than Most Line Sleeving

One 50 foot roll of 1 inch wide titanium exhaust wrap.

• Withstands 1800 Degrees F Direct/2500 Degrees F Intermittent Heat
• Promotes Increased Flow For Improved Performance
• Reduces Temperature/Vibration Breakdown
• Extremely Pliable For A Tight And Secure Wrap
• Hi-Tech Carbon Fiber Look
• Pre-Wetting Roll Not Necessary For Wrapping
• DEI HT Silicone Coating Not Required

One wide-band stainless steel pipe clamp. Inside diameter ranges from 2-1/4 inch to 2-9/16 inch.

• Can Be Polished To A Show Finish
• Great As An Exhaust Clamp
• Provides A Clean Transition From Wrap To Pipe
• Clamp Has A Range Of 2.25 in To 2.56 in.

One locking tie tool and stainless steel ties with positive locking notches, variety pack: eight at 9 inch, 4 at 20 inch. Width 7mm.

• Can Withstand 2000 Degrees F
• Includes Tool To Make Tightening Ties Quick And Easy

One T4 size turbo shield, plus a 15 foot length of exhaust wrap, two 20 inch locking ties, and a 5 foot length of stainless wire.

• Riveted Anchors Incorporated To Secure Shield
• Custom Fit For Easy Install
• Ultimate Thermal Barrier Reduces Turbo Lag
• Outer Shell Made With Our Titanium Material Coated In Silicone
• Thick Insulation Layer Made From Silica To Contain Turbo Heat
• New Inner Layer Made From Glass Fiber And Stainless Steel Thread
• Final Barrier Layer Of A Fine Stainless Steel Mesh

One T3 size turbo shield.

• Riveted Anchors Incorporated To Secure Shield
• Custom Fit For Easy Install
• Ultimate Thermal Barrier Reduces Turbo Lag
• Outer Shell Made With Our Titanium Material Coated In Silicone
• Thick Insulation Layer Made From Silica To Contain Turbo Heat
• New Inner Layer Made From Glass Fiber And Stainless Steel Thread
• Final Barrier Layer Of A Fine Stainless Steel Mesh

One 36 inch length of Ultra 47 sheath with a 3/4 inch inside diameter.

• Easy To Cut/Trim To Length
• Ultra Lightweight- 40 Percent Lighter Than Most Line Sleeving

One T4 size turbo shield and one 5 foot length of 22 gauge stainless steel wire.

• Riveted Anchors Incorporated To Secure Shield
• Custom Fit For Easy Install
• Ultimate Thermal Barrier Reduces Turbo Lag
• Outer Shell Made With Our Titanium Material Coated In Silicone
• Thick Insulation Layer Made From Silica To Contain Turbo Heat
• New Inner Layer Made From Glass Fiber And Stainless Steel Thread
• Final Barrier Layer Of A Fine Stainless Steel Mesh