Engine Intake Manifold Spacer

The CSF B58 Thermal Rejection Competition Spacer is the next level upgrade for the B58 Super Manifold (CSF #8200). Made from KIYLEX, This thermal barrier reduces manifold temps lowering IATs, improves efficiency, and combats heat soak.

• Made from KIYLEX - A patented revolutionary high-performance final stage polymer
• Limited Lifetime Warranty
• Will not work with the OEM Manifold
• Spacer Height = 6.5mm
• Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold
• Proven to lower intake manifold temperatures by up to 15%
• Lowers Intake Air Temps (IATs)
• Can withstand temps up to 1100'F and is as strong as Aluminum
• Self-Sealing and do NOT require gaskets, silicon products, or sealing agents of any kind.
• Tested on @peppa_aka_skull's A90 Supra by Visconti Tuning
• Includes installation hardware and instructions

EDELBROCK PERFORMER 5.0 351W INTAKE MANIFOLD PHENOLIC SPACER KIT

• Raises Intake Height to Clear Many Aftermarket Valve Covers - Promotes Cooler, Denser Air by Reducing Upper Intake Heat

1986-1993 FORD GT-40/COBRA INTAKE MANIFOLD 3/8 PHENOLIC SPACER KIT.

• Raises Intake Height to Clear Many Aftermarket Valve Covers - Promotes Cooler, Denser Air by Reducing Upper Intake Heat

1986-1993 MUSTANG 5.0 PHENOLIC SPACER FACTORY OE INTAKE MANIFOLD

• Raises Intake Height to Clear Many Aftermarket Valve Covers - Promotes Cooler, Denser Air by Reducing Upper Intake Heat

1986-1995 MUSTANG BBK SSI INTAKE MANIFOLD 3/8 PHENOLIC SPACER

• Raises Intake Height to Clear Many Aftermarket Valve Covers - Promotes Cooler, Denser Air by Reducing Upper Intake Heat

SBF TRICK FLOW TFS INTAKE MANIFOLD 3/8 PHENOLIC SPACER KIT

• Raises Intake Height to Clear Many Aftermarket Valve Covers - Promotes Cooler, Denser Air by Reducing Upper Intake Heat

Edelbrock Aluminum Spacer Plate and bolt kit to fit a Ford 9.2 deck SC-1 Manifold to a 9.5 deck block. Includes two spacer plates and longer bolts

Edelbrock Wood Fiber Laminate 1/2" Base to Upper Spacer Plate kit for Performer and Performer RPM 5.0 Manifolds PN's 3821 and PN 7126. Includes spacer plate, gaskets, and bolts. Used to increase valve cover to upper plenum clearance.

Edelbrock Wood Fiber Laminate 1/2" Base to Upper Spacer Plate kit for Victor 5.0 Manifolds PN 2945. Includes spacer plate, two gaskets, and longer bolts

Edelbrock Wood Fiber Laminate 1/2" Base to Upper Spacer Plate kit for Performer RPM II 5.0 Manifold PN 7123. Includes spacer plate, two gaskets, and longer bolts.