Engine Crankcase Breather Cap

Canton 65-500 Chrome Plated Valve Cover Breather Without Hood

• Chrome Plated
• Uses a woven cotton fabric enclosed in a wire mesh(Helps trap dirt particles without restricting air flow)
• Made in the USA

Canton 65-510 Universal Valve Cover Breather With 180 Degree Chrome Plated Hood

• Canton Racing Products 65-510 V.C Breather W/Hood
• Product Dimension (LxWxH): 7.4x8.2x3.45
• Cotton fiber holds oil which traps dirt particles without restricting the air flow
• Washable for long life

Canton 65-515 Aluminum Valve Cover Breather Push-In Style With Hood

• Universal Push in hooded breather for 1-1/4" holes
• Woven cotton fiber enclosed in a wire mesh holds oil which traps dirt particles without restricting air flow
• Washable For Long Life

Edelbrock part #4201 Elite Series Breather is a side mount bolt on design. The lid is removable for oil fills, and the lower housing contains a reticulated foam element to allow gases through while trapping oil.

Edelbrock part #4202 Elite Series Tall Breather is a top mount bolt on design which uses both the existing valve cover breather hole and two bolts for secure mounting.

Edelbrock part #4203 Aluminum Racing Breather is a polished die-cast tall breather which can be custom mounted to any flat top surface of the valve cover. The smooth removeable lid has a traditional look.

Edelbrock part #4204 Elite Series Short "Push-In" Breather is a die cast breather that will fit all existing Elite Series valve covers.

Edelbrock part #4213 Billet Polished Aluminum push in Breather fits all standard 1.25" valve cover holes. The top of the breather un-screws from the base for access to the foam insert.

Edelbrock part #42133 Billet Aluminum black powder coated push in breather fits all standard 1.25" valve cover holes. The top of the breather un-screws from the base for access to the foam insert.

Edelbrock part #43510 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter. It can be used as a valve cover breather for racing applications where the valve cover breathes out a 9mm diameter tube.

Edelbrock part #43511 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter. It can be used as a valve cover breather for racing applications where the valve cover breathes out a 9mm diameter tube.

Edelbrock Universal Clamp-On Breathers, 9mm Inlet, White/Chrome

Edelbrock part #43513 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter. It can be used as a valve cover breather for racing applications where the valve cover breathes out a 9mm diameter tube.

Edelbrock part #4403 Valve Cover Breather is a traditional steel one-piece push in design. It is finished with a black mini texture powder coat to match our black valve covers.

Edelbrock part #4405 Valve Cover Breather is a traditional steel one-piece push in design. The bright chrome finish matches our Signature Series valve covers.