Hood Insulation Pad

A kit consisting of three 12 inch by 12-1/2 inch sheets of Boom Mat, eight 24 inch by 12-1/2 inch sheets of Boom Mat, one 2 inch by 20 foot roll of Boom Mat Tape, and one installation roller.

• Eliminate Unwanted Engine And Road Noise
• Dampen Vibrations
• Peel And Stick

One 48 inch by 54 inch sheet of Under Carpet.

• 5.6 db Reduction Over Leading Competitors Product
• Perfect To Use Over Boom Mat Dampening Material
• Insulate Your Interior From Heat And Cold
• Provides Additional Sound Deadening
• 3/8 in. Thick
• Perfect Combination Of Noise/Vibration Control

Black

• High temp braided glass fiber
• Iron oxide silicone rubber coating
• Protection from direct heat up to 500F

One 4 piece pre-cut insulation kit.

• Precut To Fit Factory Hoods
• Self Stick/ Just Peel And Stick Installation
• Black Textured Finish Looks Great And Is Long Lasting

12 sq. ft.

• Insulate From Heat While Reducing Noise And Vibration
• Peel And Stick Application
• Protects Paint Finishes
• Resists Oil/Water And Contaminants
• 3/4 in. Thick
• 32 in. x 54 in. 12 sq. Feet
• Use As A Heat And Noise Barrier To Control Under Hood Temp

4 Pack

• Material Type: Polyurethane Elastomer
• Color: Clear to slight yellow
• Density: 69lb/ft3
• Operating Temp: -20F to 200F
• Specific Gravity: 1.10
• Thickness: .050” +/- 10%
• Hardness: 67A
• Tensile: 2400
• Elongation: 425%

One 7 inch by 24 inch Versa Shied.

• Withstands 500 Degrees F Of Direct Heat/2000 Degrees Radiant
• Edges Attach To Itself With Hook And Loop Closure Design
• Universal-Trim Length To Size
• Can Easily Be Removed For Shows
• No Need To Remove Starter For Installation In Most Cases
• Protect Master Cylinders/Cool Cans/Distributor /Fuel Pumps
• 7 in. Wide x 24 in. Long

10 Pack

• Material Type: Polyurethane Elastomer
• Color: Clear to slight yellow
• Density: 69lb/ft3
• Operating Temp: -20F to 200F
• Specific Gravity: 1.10
• Thickness: .050” +/- 10%
• Hardness: 67A
• Tensile: 2400
• Elongation: 425%

10 Pack

• Material Type: Polyurethane Elastomer
• Color: Clear to slight yellow
• Density: 69lb/ft3
• Operating Temp: -20F to 200F
• Specific Gravity: 1.10
• Thickness: .050” +/- 10%
• Hardness: 67A
• Tensile: 2400
• Elongation: 425%

10 Pack

• Material Type: Polyurethane Elastomer
• Color: Clear to slight yellow
• Density: 69lb/ft3
• Operating Temp: -20F to 200F
• Specific Gravity: 1.10
• Thickness: .050” +/- 10%
• Hardness: 67A
• Tensile: 2400
• Elongation: 425%

One 4 piece pre-cut headliner kit.

• Peel And Stick Application
• Insulate Interior From Heat And Cold
• Provides Additional Sound Deadening
• 1 in. Thick
• Headliner Reduces
• A Significant Change In Noise Level
• Pairs Perfectly With Jeep Wrangler Side Window Kit
• 2 Pieces

One 24 inch by 70 inch sheet of Under Carpet Lite.

• Insulates Up To 85 Percent Of Unwanted Heat
• Multi-Layered Composite Material For Maximum Insulation
• Light Weight
• Superior Noise Absorber
• Perfect To Use Over Boom Mat
• 1/2 in. Thick

Four 2 inch by 3 inch strips and two 2 inch by 12 inch strips of damping tape, six 6 inch by 6 inch sheets of Boom Mat Flex, thirty-three 6 inch by 12 inch sheets of Boom Mat Flex, and forty-two 12 inch by 12 inch sheets of Boom Mat Flex.

• Damping Kit

ThermoTec Aluminized Heat Barrier Adhesive Backed, 24in x 48in

• Durable and lightweight
• Show-ready. No painting required.
• Uses professional, high quality 3K 2X2 twill weave carbon fiber fabric.