Sound Dampening Sheet

One 24 inch length of 4 inch diameter Titanium exhaust sleeve, two stainless steel locking ties, and one locking tie tool.

• Withstands 1200 Degrees F Direct/2500 Degrees F Intermittent Heat
• Promotes Increased Flow For Improved Performance
• Reduces Temperature/Vibration Breakdown
• Extremely Pliable For A Tight And Secure Wrap
• Resistance To Abrasions/Oil Spills/Temp/Vibration Breakdown
• Hi-Tech Carbon Fiber Look
• Pre-Wetting Roll Not Necessary For Wrapping

One 36 inch length of silver Cool Tube Extreme with a 3/4 inch inside diameter.

• No Need To Remove Wires/Cables Or Hoses/Can Be Slit Lengthwise
• Reflects 750 Degrees F Direct Continuous Heat
• Easily Trim To Length
• Tough/Durable With An Easy To Clean Finish
• 3/4 in x 3 ft
• Silver

One T3 size turbo shield, plus a 15 foot length of exhaust wrap, two 20 inch locking ties, and a 5 foot length of stainless wire.

• Riveted anchors incorporated to secure shield
• Ultimate thermal barrier reduces turbo lag
• Silicone coated Onyx Black outer shell
• Silica inner insulation layer
• Glass fiber with strnded stainless inner layer
• Barrier layer of fine stainless mesh

Four silver 6 inch Protect-A-Boots with internal metal ring.

• Withstands 1200 Degrees F Direct Continuous Heat
• Helps Prevent Burn-Through/Hardening And Cracking Of Boots
• Universal-Fits Most Straight Or Angled Boots
• Easy Install
• Double-Wall Construction For Added Durability
• Non-Flammable And Protects Against Chemicals And Resists Water
• Reinforcement Ring For Easy Plug Removal During Maintenance

One 13 foot length of blue Protect-A-Wire with a 5/16 inch inside diameter, four 6 inch blue Protect-A-Boots with internal metal ring, and twelve 1-1/2 inch long heat shrink tube pieces.

• 13 Feet Of Protect-A-Wire Line Sleeving
• 12 Hi-Temp Shrink Tubes
• 4 Protect-A-Boots

One 10 foot length of Heat Shroud with an inside diameter to fit 20 AN lines.

• No need to remove wires and hoses
• Convenient hook & loop closure design
• Available in sizes ranging 0.5 - 2.5 inches in diameter
• Reflects 90% of radiant heat
• Easily trimmed to length

One 6 piece pre-cut insulation kit.

• Precut To Fit Factory Hoods
• Self Stick/ Just Peel And Stick Installation
• Black Textured Finish Looks Great And Is Long Lasting

One 32 oz bottle of Radiator Relief.

• Reduces Engine Temp Up To 30 Degrees F
• Note: Radiator Relief is not intended to and cannot fix a malfunctioning thermostat.
• Includes Anti-Foaming Agent
• Formulated With A Corrosion Inhibitor
• Reduces pre-existing scale build-up
• Compatible with all types of anti-freeze
• Compatible with aluminum radiators
• Must cycle and mix with existing coolant before effective
• Performance will not dissipate over time
• Recommended 1 oz per quart of coolant

One 4 piece pre-cut headliner kit.

• Peel And Stick Application
• Insulate Interior From Heat And Cold
• Provides Additional Sound Deadening
• 1 in. Thick
• Headliner Reduces
• A Significant Change In Noise Level
• Pairs Perfectly With Jeep Wrangler Side Window Kit
• 2 Pieces

One 7 piece pre-cut headliner kit.

• Peel And Stick Application
• Insulate Interior From Heat And Cold
• Provides Additional Sound Deadening
• 1 in. Thick
• Headliner Reduces
• A Significant Change In Noise Level
• Pairs Perfectly With Jeep Wrangler Side Window Kit
• 3 Pieces

One 4 piece pre-cut headliner kit.

• Peel And Stick Application
• Insulate Interior From Heat And Cold
• Provides Additional Sound Deadening
• 1 in. Thick
• Headliner Reduces
• A Significant Change In Noise Level
• Pairs Perfectly With Jeep Wrangler Side Window Kit
• 2 Pieces

One 2 piece pre-cut window kit.

• Compliments Your Jeep Sound-Deadening Headliner Kit
• Adds Additional Sound Deadening/Thermal Insulation
• Available In Black Or Gray Leather Look

Two 24 inch by 12-1/2 inch sheets of Boom Mat XL.

• 4mm Thick Asphalt Free/Pure Butyl/Noise Constraining Layer
• Top Skin Keeps Panels From Generating Noise
• Worry Free No Sag Adhesion
• First Choice Of The Industries Top Custom Car Builders

Four 12 inch by 12-1/2 inch sheets of Boom Mat.

• High Performance Adhesive Lasts Throughout Temperature Extremes
• The Industry Standard In Vibrational Damping Technology
• Eliminates Low Frequency Noise Problems
• Easily Trimmed To Size With Boom Mat Blade Lock Knife
• Non-Hazardous Material
• Flexible - Can Be Applied To Irregular Surfaces
• User Friendly Peal And Stick Installation
• Multiple Uses Including Automotive/Industrial Applications
• Durable Weatherproof Construction Is Also Corrosion Resistant
• Flammability Rated

Twenty 24 inch by 12-1/2 inch sheets of Boom Mat.

• High Performance Adhesive Lasts Throughout Temperature Extremes
• The Industry Standard In Vibrational Damping Technology
• Eliminates Low Frequency Noise Problems
• Easily Trimmed To Size With Boom Mat Blade Lock Knife
• Non-Hazardous Material
• Flexible - Can Be Applied To Irregular Surfaces
• User Friendly Peal And Stick Installation
• Multiple Uses Including Automotive/Industrial Applications
• Durable Weatherproof Construction Is Also Corrosion Resistant
• Flammability Rated

One 2 inch by 20 foot roll of damping tape.

• 2 in. x 20 ft. Roll
• Great As A Water Proof Patch For Home Or RV Uses
• Easy To Use And Cut Into Lengths
• Great For Securing Cables And Wires