Bumper

ARB Winch Mount Bumper, Compatible with ARB Fog Lights

• Durable Steel Construction
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Provision for Driving Lights
• Black Powder Coat
• Multi Fold Upswept And Tapered Wing Design
• Split Pan Design
• Extensive Under Protection Panels
• Durable Urethane Buffers
• Twin Hi-Lift Jacking Points
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead

ARB Winch Mount Bumper, Compatible with ARB Fog Lights

• Durable Steel Construction
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Provision for Driving Lights
• Black Powder Coat
• Multi Fold Upswept And Tapered Wing Design
• Split Pan Design
• Extensive Under Protection Panels
• Durable Urethane Buffers
• Twin Hi-Lift Jacking Points
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead

ARB Summit Winch Bumper, Integrit Textured Black Powder Coat Finish, Compatible with ARB Fog Lights

• Air bag compatible
• Zinc Rich Primer For Corrosion Resistance
• Compatible with most electric low mount winches, up to 10,000 lb
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)
• Provision for Driving Lights
• Durable Steel Construction For Maximum Protection

ARB Summit Winch Bumper, Integrit Textured Black Powder Coat Finish, Compatible with ARB Fog Lights

• Air Bag Compatible
• Zinc Rich Primer For Corrosion Resistance
• Compatible with most electric low mount winches, up to 10,000 lb
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)
• Provision for Driving Lights
• Durable Steel Construction For Maximum Protection

Compatible with ARB Fog Lights

• Air Bag Compatible
• Will Accommodate Intensity LEDs And IPF Lights
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Provision for driving lights
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)
• Zinc Rich Primer For Corrosion Resistance
• 30mm Radius on Wings And Center
• Incl. LED Indicator And Clearance Light
• Will Accommodate Warn/Magnum/Smittybilt Low Mount Winches
• Durable Two-Piece Buffers
• Vehicle Specific Design
• Twin Hi-Lift Jack Points
• Two Aerial Brackets

Includes Summit Bumper, Fog Light Kit and Loom, Winch Installation Kit, and Camera Relocation Kit

• Air Bag Compatible
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)
• 30mm Radius on Wings and Center
• Durable Two-Piece Buffers
• Includes LED Indicator and Clearance Light
• Accommodates Intensity LEDs And IPF Lights
• Twin Hi-Lift Jack Points
• Front Camera Relocation Kit and Instructions Included
• Two Aerial Brackets
• Zinc Rich Primer for Corrosion Resistance

ARB Summit MKII Winch Bumper Kit with LED fog lights and a winch install kit

• Durable steel construction for maximum protection
• Multi-fold, upswept and tapered wing design for optimum strength and approach angle
• Air bag compatible mounting system secures to the chassis via high tensile bolts
• Twin ARB Jack or farm jack points located in the lower pan
• Includes LED fog lights, LED daytime running lights and LED indicators and clearance lights
• Compatible with original equipment manufacturer (OEM) safety features
• Provision for driving lights
• Compatible with most electric low mount winches, up to 10,000 lb capacity
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)
• Two aerial brackets located on the center frame

ARB Summit MKII Winch Bumper Kit with LED fog lights and a winch install kit

• Durable steel construction for maximum protection
• Multi-fold, upswept and tapered wing design for optimum strength and approach angle
• Air bag compatible mounting system secures to the chassis via high tensile bolts
• Twin ARB Jack or farm jack points located in the lower pan
• Includes LED fog lights, LED daytime running lights and LED indicators and clearance lights
• Compatible with original equipment manufacturer (OEM) safety features
• Provision for driving lights
• Compatible with most electric low mount winches, up to 10,000 lb capacity
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)
• Two aerial brackets located on the center frame

ARB Zenith Winch Bumper Only

• Two 8T rated recovery points, engineered and integrated into the bumper, rated to 17,637lbs (8T) and finished in red powder coat
• Bash plates included, with one heavy forged center piece and additional side bash plates for added protection on rugged terrain
• Compatible with OE fog lights (on applicable models)
• Slimline design profile, with minimal front overhang
• Built-in winch cradle, the Zenith bumper is compatible with most low mount winches up to 12,000lbs
• Compatible with factory Radar ADAS, Parking Sensors, and Airbag systems
• Made from durable laser cut and formed 3mm steel for maximum strength-to-weight ratio, the Zenith is meta prep primed, and powder coated in an satin finish for corrosion resistance
• A removable center grille allows for the install of up to seven 4in pod lights or lightbars up to 30in
• Twin recessed recovery jack points on the front of the bumper to ensure safe and secure locations to perform an recovery. Compatible with ARB Jack and traditional farm jacks.

ARB Zenith Winch Bumper Only

• Two 8T rated recovery points, engineered and integrated into the bumper, rated to 17,637 lbs (8T) and finished in red powder coat
• Skid plates included, with one heavy center piece and additional side plates for added protection on rugged terrain
• Includes ARB LED fog lights
• Slimline design profile, with minimal front overhang
• Built-in winch cradle makes the Zenith bumper compatible with low mount winches up to 21.5 inches wide and 12,000 lbs capacity
• Compatible with factory Radar ADAS, Parking Sensors, and Airbag systems
• Made from durable laser cut and formed 3 mm steel for maximum strength-to-weight ratio, the Zenith is meta prep primed and powder coated in an satin finish for corrosion resistance
• Mounting options for up to four 4-inch pod lights
• Twin recessed recovery jack points on the front of the bumper to ensure safe and secure locations to perform an recovery. Compatible with ARB Jack and traditional farm jacks.

ARB Zenith Winch Bumper

• Two 8T rated recovery points, engineered and integrated into the bumper, rated to 17,637lbs (8T) and finished in red powder coat
• Bash plates included, with one heavy forged center piece and additional side bash plates for added protection on rugged terrain
• Compatible with OE fog lights (on applicable models)
• Slimline design profile, with minimal front overhang
• Built-in winch cradle, the Zenith bumper is compatible with most low mount winches up to 12,000lbs
• Compatible with factory Radar ADAS, Parking Sensors, and Airbag systems
• Made from durable laser cut and formed 3mm steel for maximum strength-to-weight ratio, the Zenith is meta prep primed, and powder coated in an satin finish for corrosion resistance
• A removable center grille allows for the install of up to seven 4in pod lights or lightbars up to 30in
• Twin recessed recovery jack points on the front of the bumper to ensure safe and secure locations to perform an recovery. Compatible with ARB Jack and traditional farm jacks.

ARB Zenith Winch Bumper

• Two 8T rated recovery points, engineered and integrated into the bumper, rated to 17,637 lbs (8T) and finished in red powder coat
• Skid plates included, with one heavy center piece and additional side plates for added protection on rugged terrain
• Includes ARB LED fog lights
• Slimline design profile, with minimal front overhang
• Built-in winch cradle makes the Zenith bumper compatible with low mount winches up to 21.5 inches wide and 12,000 lbs capacity
• Compatible with factory Radar ADAS, Parking Sensors, and Airbag systems
• Made from durable laser cut and formed 3 mm steel for maximum strength-to-weight ratio, the Zenith is meta prep primed and powder coated in an satin finish for corrosion resistance
• Mounting options for up to four 4-inch pod lights
• Twin recessed recovery jack points on the front of the bumper to ensure safe and secure locations to perform an recovery. Compatible with ARB Jack and traditional farm jacks.

ARB Summit Combination Bumper

• Air bag compatible
• Provision for Driving Lights
• 30mm edge radius on the wings and center pan
• Wider press formed cover straps
• 60.3mm top tubing for increased frontal protection
• Two-piece polyethylene buffers
• Twin Hi-Lift Jacking Points
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Provisions For ARB Fog Lights

ARB Summit Combination Bumper

• Air bag compatible
• Provision for Driving Lights
• 30mm edge radius on the wings and center pan
• Wider press formed cover straps
• 60.3mm top tubing for increased frontal protection
• Two-piece polyethylene buffers
• Twin Hi-Lift Jacking Points
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Provisions For ARB Fog Lights

ARB Combination Bumper

• Durable Steel Construction
• Provision for driving lights
• Black Powder Coat
• Multi Fold Upswept And Tapered Wing Design
• Split Pan Design
• Twin Hi-Lift Jacking Points
• Provision For IPF Driving Lights
• Durable Urethane Buffers
• OEM Tow Points
• Winch compatible

ARB Summit MKII Winch Bumper Kit

• Durable steel construction for maximum protection
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)
• Multi-fold, upswept and tapered wing design for optimum strength and approach angle
• Air bag compatible mounting system secures to the chassis via high tensile bolts
• Extensive under protection panels on center and either side
• Twin ARB Jack or farm jack points located in the lower pan
• Includes LED fog light, LED daytime running light and LED indicators and clearance lights
• Compatible with original equipment manufacturer (OEM) safety features
• Provision for driving lights
• Compatible with most electic low mount winches, up to 12,000 lb capacity