Nitrous / Nitrous Purge / Fuel Solenoid

This fitting features 3 -4AN ends arranged in a tee shape. The two male -4AN ends are arranged across from one another while the -4AN female swivel end is perpendicular.

This is 1 ft of carbureter rated fuel line with a 5/16 ID.

This AN hose is 7.5" (in) long and features -3AN swivel fitting on one end and 1/8 in on the other. .040 in Inside Diameter.

This AN hose is 7.5" (in) long and features -3AN swivel fitting on one end and 1/8 in on the other. .086 in Inside Diameter.

This Aircraft Style Cover is included with our 82002 toggle switch kit. This cover is a great way to use an existing switch for a nitrous project.

This in-line fuel pump upgrades the fuel supply potential of your engine to 650 HP.

This fitting is designed to secure NS6506 to bulkhead.

Our CGA 326 Valve is a great replacement for standard nitrous oxide bottles.

This nut comes equipped with our standard nitrous bottles. This nut fits our High-Flow design bottle valves such as our NS6543.

This distribution block features 1 in and 4 out 1/8 NPT fittings for distributing a nitrous supply to up to four cylinders in direct port applications such as our 82032, 82062, 82063 and 82030.

This screw is used to mount our Nitrous Oxide Distribution Blocks such as our NS6703A.

The ZEX? Fuel Flow Check Tool is used to properly set flowing fuel pressure for any nitrous oxide injection system. Setting the fuel pressure on the nitrous system?s fuel feed line is critical for engine power and safety.

This fitting allows you to plumb your NS6601 in-line by adapting the female threads of the pump to a male slip in barb fitting.

This fitting is used primarily to intercept an existing soft fuel line and provide a 1/8" NPT fitting to supply fuel to a fuel solenoid in your nitrous system.

Seal for NS6702A 6An Bottle Valve Fitting

This hardware kit comes with our 82020 fuel pump kit. Designed to allow you to properly secure our NS6601 pump and our NS6602 brackets to the underside of your car.