Nitrous / Nitrous Purge / Fuel Solenoid

This fitting features a male 4AN End and 1/8 NPT Male End

This AN Bottle Fitting is used on our kits that feature a -6AN feed line such as our Race Perimeter Plate Systems (82311, 82312 etc).

This AN hose is 1' (ft) long and features -4AN swivel fittings on both ends.

This bulkhead fitting is designed to be used with NS6508 for routing nitrous lines through surfaces.

This tap is used to create a 1/16 NPT-27 thread. Great tool to have when installing a nitrous system.

This fitting is used in a number of our kits that feature our wet nitrous management unit such as our 82235 LSX kit and others. Great to have on hand when plumbing any nitrous system.

This fitting is designed for routing nitrous lines through bulkheads such as firewalls, trunk floors etc. This fitting has 1/8 NPT threads and comes with a backing nut to secure the fitting to the panel through which it is passing.

This tap is used to create a 1/8 NPT-27 thread. Great tool to have when installing a nitrous system.

This AN hose is 14' (ft) long and features -4AN swivel fittings on both ends.

This toggle switch comes with our 82369 bottle heater kit. Works well with any electrical project that calls for a switch that can handle up to 15 amps of current.

This AN hose is 16' (ft) long and features female -4AN swivel fittings on both ends.

This AN hose is 18' (ft) long and features a -4AN swivel fitting on both ends.

This AN hose is 18' (ft) long and features a -4AN swivel fitting on both ends.

This AN hose is 2' (ft) long and features -3 AN swivel fittings on both ends. The hose is .106" in inside diameter.

This AN hose is 2' (ft) long and features -3 AN swivel fittings on both ends. The hose is .086" in inside diameter.

This AN hose is 2' (ft) long and features a -4AN swivel fitting on both ends.