
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00850007616052
	<b>Prop 65 Warning: </b>WARNING This product can expose you to lead, which is know to the State of California to cause cancer and birth defects or reproductive harm. (For more information go to www.p65warnings.ca.gov)

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>11 x 8 x 2.5 inches
	<b>Weight: </b>5 PG


Rhino USA

RHINO USA SNATCH BLOCK

RHINO USA SNATCH BLOCK - RNO-SNTCH-BLCK
<ul>	<li>Lifetime Warranty</li>
	<li>13.5 Ton Capacity</li>
	<li>Smooth & Efficient Operation</li>
	<li>Superior Contruction</li>
</ul>


A lightweight and compact alternative to traditional heavy snatch blocks/pulleys, the RRP XXL can be used to increase pulling power or redirect the winch line. The RRP XXL is for use with synthetic rope only and is to be used in conjunction with a non-coated soft shackle. During momentary slack, the rope retention rubber fingers prevent the winch rope from escaping the pulley groove. The oversized hole radius provides a smooth surface and keeps the soft shackle from rubbing on the edges of the RRP XXL. The friction surface has been treated with Teflon to increase slickness and heat dissipation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748111498
	<b>Color: </b>GRAY
	<b>Finish: </b>Hard Anodized
	<b>Material: </b>6061 Aluminum
	<b>Tubing Diameter: </b>00126

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>8 x 8 x 3 inches
	<b>Weight: </b>5 PG


Factor 55

ROPE RETNETION PULLEY XXL (RRP XXL)

The world?s first winch friction pulley with patented rope retention feature. A lightweight alternative to traditional heavy snatch blocks/pulleys.
<ul>	<li>Pulley only</li>
	<li>For Synthetic Rope Diameters 1/2 to 3/4 inch (12-19mm)</li>
	<li>Mil-A-8625 F Hard Anodized Surface</li>
	<li>Billet machined 6000 series aluminum</li>
	<li>WLL 56,000 pounds (251.8 KN)</li>
	<li>Made in the USA</li>
</ul>


A lightweight and compact alternative to traditional heavy snatch blocks/pulleys, the RRP XTV can be used to increase pulling power or redirect the winch line. The RRP XTV is for use with synthetic rope only and is to be used in conjunction with a non-coated soft shackle. During momentary slack, the rope retention rubber fingers prevent the winch rope from escaping the pulley groove. The oversized hole radius provides a smooth surface and keeps the soft shackle from rubbing on the edges of the RRP XTV. The friction surface has been treated with Teflon to increase slickness and heat dissipation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748095699
	<b>Color: </b>GRAY
	<b>Finish: </b>Hard Anodized
	<b>Material: </b>6061 Aluminum

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>4 x 4 x 4 inches
	<b>Weight: </b>1.13 PG


ROPE RETENTION PULLEY XTV (RRP XTV) + SOFT SHACKLE COMBO

The world?s first winch friction pulley with patented rope retention feature. A lightweight alternative to traditional heavy snatch blocks/pulleys. Packaged with a Soft Shackle.
<ul>	<li>Includes pulley and 7/16" x 10" Standard Duty Soft Shackle</li>
	<li>For Synthetic Rope Diameters 3/16 to 1/4 inch (5-7 mm)</li>
	<li>Mil-A-8625 F Hard Anodized Surface</li>
	<li>Billet machined 6000 series aluminum</li>
	<li>WLL 12,000 pounds (57.8 KN)</li>
	<li>Made in the USA</li>
</ul>


A lightweight and compact alternative to traditional heavy snatch blocks/pulleys, the RRP can be used to increase pulling power or redirect the winch line. The RRP is for use with synthetic rope only and is to be used in conjunction with a non-coated soft shackle. During momentary slack, the rope retention rubber fingers prevent the winch rope from escaping the pulley groove. The oversized hole radius provides a smooth surface and keeps the soft shackle from rubbing on the edges of the RRP. The friction surface has been treated with Teflon to increase slickness and heat dissipation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748095682
	<b>Color: </b>GRAY
	<b>Finish: </b>Hard Anodized
	<b>Material: </b>6061 Aluminum

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>5 x 7 x 5 inches
	<b>Weight: </b>2 PG


ROPE RETENTION PULLEY (RRP) + SOFT SHACKLE COMBO

The world?s first winch friction pulley with patented rope retention feature. A lightweight alternative to traditional heavy snatch blocks/pulleys. Packaged with a Soft Shackle.
<ul>	<li>Includes pulley and 7/16" x 10" Standard Duty Soft Shackle</li>
	<li>For Synthetic Rope Diameters 5/16 to 1/2 inch (8-12mm)</li>
	<li>Mil-A-8625 F Hard Anodized Surface</li>
	<li>Billet machined 6000 series aluminum</li>
	<li>WLL 22,000 pounds (97.9 KN)</li>
	<li>Made in the USA</li>
</ul>


A lightweight and compact alternative to traditional heavy snatch blocks/pulleys, the RRP XTV can be used to increase pulling power or redirect the winch line. The RRP XTV is for use with synthetic rope only and is to be used in conjunction with a non-coated soft shackle. During momentary slack, the rope retention rubber fingers prevent the winch rope from escaping the pulley groove. The oversized hole radius provides a smooth surface and keeps the soft shackle from rubbing on the edges of the RRP XTV. The friction surface has been treated with Teflon to increase slickness and heat dissipation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748095651
	<b>Color: </b>GRAY
	<b>Finish: </b>Hard Anodized
	<b>Material: </b>6061 Aluminum
	<b>Tubing Diameter: </b>00069

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>4 x 4 x 4 inches
	<b>Weight: </b>1.69 PG


ROPE RETNETION PULLEY XTV (RRP XTV)

The world?s first winch friction pulley with patented rope retention feature. A lightweight alternative to traditional heavy snatch blocks/pulleys.
<ul>	<li>Pulley only</li>
	<li>For Synthetic Rope Diameters 3/16 to 1/4 inch (5-7 mm)</li>
	<li>Mil-A-8625 F Hard Anodized Surface</li>
	<li>Billet machined 6000 series aluminum</li>
	<li>WLL 12,000 pounds (57.8 KN)</li>
	<li>Made in the USA</li>
</ul>


A lightweight and compact alternative to traditional heavy snatch blocks/pulleys, the RRP can be used to increase pulling power or redirect the winch line. The RRP is for use with synthetic rope only and is to be used in conjunction with a non-coated soft shackle. During momentary slack, the rope retention rubber fingers prevent the winch rope from escaping the pulley groove. The oversized hole radius provides a smooth surface and keeps the soft shackle from rubbing on the edges of the RRP. The friction surface has been treated with Teflon to increase slickness and heat dissipation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748095620
	<b>Color: </b>Gray
	<b>Finish: </b>Hard Anodized
	<b>Material: </b>6061 Aluminum
	<b>Tubing Diameter: </b>00069

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>5 x 5 x 5 inches
	<b>Weight: </b>1.5 PG


ROPE RETENTION PULLEY (RRP)

The world?s first winch friction pulley with patented rope retention feature. A lightweight alternative to traditional heavy snatch blocks/pulleys.
<ul>	<li>Pulley only</li>
	<li>For Synthetic Rope Diameters 5/16 to 1/2 inch (8-12mm)</li>
	<li>Mil-A-8625 F Hard Anodized Surface</li>
	<li>Billet machined 6000 series aluminum</li>
	<li>WLL 22,000 pounds (97.9 KN)</li>
	<li>Made in the USA</li>
</ul>


Safely recover any vehicle from any angle with RT Off-Roads Snatch Block Kit. The greasable snatch block is rated for 15,000 lbs. resulting in a smooth, worry-free operation. It will accommodate 3/8&quot; steel or synthetic winch lines and reduces the strain put on the winch motor while doubling its pulling power. Also included is a winch line damper to keep everyone in the vicinity safer in case of a winch line failure.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00849603008798
	<b>Color: </b>Silver
	<b>Construction: </b>Metal Nylon
	<b>Oversized Extra Shipping: </b>No
	<b>Prop 65 Yes/No: </b>N

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>KT
	<b>Dimension: </b>13.5 x 7 x 3 inches
	<b>Weight: </b>8 PG


RT Offroad

RT Off-Road - Metal Silver Snatch Block Kit

Snatch Block Kit
<ul>	<li>Allows A Safe Recovery From Any Position</li>
</ul>


When you&rsquo;re in the middle of nowhere, stuck in a ditch or doors-deep in mud, the keys to getting out are quality equipment, and confidence. Often, the best quality and most confidence inspiring equipment is also the simplest, and when it comes to vehicle recovery, one of the simplest tools you can have in your arsenal is a snatch block. Whether you&rsquo;re winching yourself out with a tree strap or getting a helping hand from a friend, a strong snatch block is key to getting out of a sticky situation. This Borne Off-Road snatch block is rated for a working load limit of over 17,000-pounds, making it strong enough to recover any ATV or side-by-side. Our snatch block can also be combined with our Borne Off-Road 3/4&quot; D-Ring Shackle for a one-stop recovery system. The center roller accepts 1/4&quot; steel or synthetic lines and is greaseable via a convenient zerk fitting. The split plate design makes attaching to a winch line easy, without having to remove shackles. The 5mm-thick steel side plates are powder coated for maximum corrosion resistance and our snatch block is backed by our Borne Off-Road Lifetime Warranty for a lifetime of confidence off-road.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00840197709955
	<b>Color: </b>N/A
	<b>Install Difficulty: </b>1
	<b>SellingPoint01: </b>Steel snatch block allows for self-recovery with a tree strap or angle pulls with other vehicles
	<b>SellingPoint02: </b>Doubles winch’s pulling power when used in double-line pulls
	<b>SellingPoint03: </b>Compatible with Borne Off-Road D-Ring Shackle
	<b>SellingPoint04: </b>17,637-lbs working load limit is strong enough for any ATV or side-by-side
	<b>SellingPoint05: </b>Accepts 1/4-in steel or synthetic winch lines
	<b>SellingPoint06: </b>Split-plate design allows for installation without disconnecting shackles
	<b>SellingPoint07: </b>Zerk fitting makes greasing easy for hassle-free maintenance
	<b>SellingPoint08: </b>Powder coated 5mm-thick steel plates for ultimate durability
	<b>SellingPoint09: </b>Borne Off-Road Lifetime Warranty
	<b>SellingPoint10: </b>N/A
	<b>SellingPoint11: </b>N/A
	<b>SellingPoint12: </b>N/A
	<b>SellingPoint13: </b>N/A
	<b>SellingPoint14: </b>N/A
	<b>SellingPoint15: </b>N/A
	<b>TechSpec Applications: </b>N/A
	<b>TechSpec Diameter (Inches): </b>N/A
	<b>TechSpec Engine Codes: </b>N/A
	<b>TechSpec Includes: </b>(1) 8-Ton Snatch Block--(1) Storage Bag--Borne Off-Road Lifetime Warranty
	<b>TechSpec Installation Notes: </b>N/A
	<b>TechSpec Length (Inches): </b>9.45
	<b>TechSpec Material: </b>N/A
	<b>TechSpec Maximum Pressure (PSI): </b>N/A
	<b>TechSpec Maximum Temperature (F): </b>N/A
	<b>TechSpec Minimum Yield Strength: </b>17637
	<b>TechSpec Note: </b>Greasing of the zerk fitting is required before operation.
	<b>TechSpec Overall Height (Inches): </b>1.77
	<b>TechSpec Thread Size: </b>N/A
	<b>TechSpec Ultimate Tensile Strength: </b>N/A
	<b>TechSpec Weight (Ounces): </b>N/A

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 7 x 2.5 inches
	<b>Weight: </b>6 PG


Mishimoto

Borne Off-Road 8-Ton Snatch Block

Borne Off-Road 8-Ton Snatch Block
<ul>	<li>Steel snatch block allows for self-recovery with a tree strap or angle pulls with other vehicles</li>
	<li>Doubles winch’s pulling power when used in double-line pulls</li>
	<li>Compatible with Borne Off-Road 3/4" D-Ring Shackle</li>
	<li>17,637-lbs working load limit is strong enough for any ATV or side-by-side</li>
	<li>Accepts 1/4" steel or synthetic winch lines</li>
	<li>Split-plate design allows for installation without disconnecting shackles</li>
	<li>Zerk fitting makes greasing easy for hassle-free maintenance</li>
	<li>Powder coated 5mm-thick steel plates for ultimate durability</li>
	<li>Borne Off-Road Lifetime Warranty</li>
</ul>


When you&rsquo;re in the middle of nowhere, stuck in a ditch or doors-deep in mud, the keys to getting out are quality equipment, and confidence. Often, the best quality and most confidence inspiring equipment is also the simplest, and when it comes to vehicle recovery, one of the simplest tools you can have in your arsenal is a snatch block. Whether you&rsquo;re winching yourself out with a tree strap or getting a helping hand from a friend, a strong snatch block is key to getting out of a sticky situation. This Borne Off-Road snatch block is rated for a working load limit of over 22,000-pounds, making it strong enough to recover any large truck or Jeep. Our snatch block can also be combined with our Borne Off-Road 3/4&quot; D-Ring Shackle for a one-stop recovery system. The center roller accepts 1/2&quot; steel or synthetic lines and is greaseable via a convenient zerk fitting. The split plate design makes attaching to a winch line easy, without having to remove shackles. The 5mm-thick steel side plates are powder coated for maximum corrosion resistance and our snatch block is backed by our Borne Off-Road Lifetime Warranty for a lifetime of confidence off-road.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00840197709962
	<b>Color: </b>N/A
	<b>Install Difficulty: </b>1
	<b>SellingPoint01: </b>Steel snatch block allows for self-recovery with a tree strap or angle pulls with other vehicles
	<b>SellingPoint02: </b>Doubles winch’s pulling power when used in double-line pulls
	<b>SellingPoint03: </b>Compatible with Borne Off-Road D-Ring Shackle
	<b>SellingPoint04: </b>Our recovery ring is engineered to surpass the limitations of traditional recovery gear.
	<b>SellingPoint05: </b>Accepts 1/2-in steel or synthetic winch lines
	<b>SellingPoint06: </b>Split-plate design allows for installation without disconnecting shackles
	<b>SellingPoint07: </b>Zerk fitting makes greasing easy for hassle-free maintenance
	<b>SellingPoint08: </b>Powder coated 5mm-thick steel plates for ultimate durability
	<b>SellingPoint09: </b>Borne Off-Road Lifetime Warranty
	<b>SellingPoint10: </b>N/A
	<b>SellingPoint11: </b>N/A
	<b>SellingPoint12: </b>N/A
	<b>SellingPoint13: </b>N/A
	<b>SellingPoint14: </b>N/A
	<b>SellingPoint15: </b>N/A
	<b>TechSpec Applications: </b>N/A
	<b>TechSpec Diameter (Inches): </b>N/A
	<b>TechSpec Engine Codes: </b>N/A
	<b>TechSpec Includes: </b>(1) 10-Ton Snatch Block--(1) Storage Bag--Borne Off-Road Lifetime Warranty
	<b>TechSpec Installation Notes: </b>N/A
	<b>TechSpec Length (Inches): </b>10.63
	<b>TechSpec Material: </b>N/A
	<b>TechSpec Maximum Pressure (PSI): </b>N/A
	<b>TechSpec Maximum Temperature (F): </b>N/A
	<b>TechSpec Minimum Yield Strength: </b>22046
	<b>TechSpec Note: </b>Greasing of the zerk fitting is required before operation.
	<b>TechSpec Overall Height (Inches): </b>1.77
	<b>TechSpec Thread Size: </b>N/A
	<b>TechSpec Ultimate Tensile Strength: </b>N/A
	<b>TechSpec Weight (Ounces): </b>N/A

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>10 x 7 x 2.5 inches
	<b>Weight: </b>7 PG


Borne Off-Road 10-Ton Snatch Block

Borne Off-Road 10-Ton Snatch Block
<ul>	<li>Steel snatch block allows for self-recovery with a tree strap or angle pulls with other vehicles</li>
	<li>Doubles winch’s pulling power when used in double-line pulls</li>
	<li>Compatible with Borne Off-Road 3/4" D-Ring Shackle</li>
	<li>22,046-lbs working load limit is strong enough for any ATV or side-by-side</li>
	<li>Accepts 1/2" steel or synthetic winch lines</li>
	<li>Split-plate design allows for installation without disconnecting shackles</li>
	<li>Zerk fitting makes greasing easy for hassle-free maintenance</li>
	<li>Powder coated 5mm-thick steel plates for ultimate durability</li>
	<li>Borne Off-Road Lifetime Warranty</li>
</ul>


Off-roading and overlanding are 50% driving skill and 50% knowing what to do when you get stuck. And you will get stuck. For that 50% of the time that you&rsquo;re not navigating trails, a proper recovery system is essential. A winch with a strong line, a few shackles, and something to connect them together are the bare minimum when it comes to recovery. In between your winch line and whatever you&rsquo;re using as an anchor, you need something that rotates and takes the strain off your winch line. Twenty years ago, you&rsquo;d be lugging around a heavy steel snatch block and wondering if you greased the bearing recently. But these days, there&rsquo;s a lightweight, simple, safer, and more durable solution in the form of recovery rings. This Mishimoto recovery ring is constructed from ultra-lightweight aircraft grade 6061 aluminum and weighs in at about 1/3 the weight of traditional snatch blocks. Its simple design makes recovery just as simple without worrying about failed or worn-out bearings. Our specially engineered recovery ring features radiused faces that prevent your soft shackle from clamping down on the rings edge, reducing friction for a smoother recovery. The large inner and outer diameters slow the ring&rsquo;s rotation, and the military-grade hard-anodized coating further reduces friction and prevents scratching that can damage synthetic winch lines. The Borne Off-Road truck and Jeep recovery ring accepts a 1/2-inch winch line and has a working load limit of 22,000 lbs. making it strong enough to recover even the largest off-road vehicle. And, like all our products, it&rsquo;s backed by our Borne Off-Road Lifetime Warranty for a lifetime of smooth recoveries.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00840197711149
	<b>Color: </b>N/A
	<b>Install Difficulty: </b>2
	<b>SellingPoint01: </b>Lightweight alternative to snatch blocks
	<b>SellingPoint02: </b>Safe for use with synthetic winch lines and soft shackles
	<b>SellingPoint03: </b>Radiused faces reduce stress on shackle and winch line
	<b>SellingPoint04: </b>Military-grade hard-anodized coating reduces friction and prevents scratching
	<b>SellingPoint05: </b>6061 aluminum construction for light weight, corrosion resistance, and high strength
	<b>SellingPoint06: </b>No bearings for maintenance-free operation
	<b>SellingPoint07: </b>Large inner and outer radius reduce rotation speed and friction
	<b>SellingPoint08: </b>Our recovery ring is engineered to surpass the limitations of traditional recovery gear
	<b>SellingPoint09: </b>Accepts 1/2-inch winch line
	<b>SellingPoint10: </b>Borne Off-Road Lifetime Warranty
	<b>SellingPoint11: </b>N/A
	<b>SellingPoint12: </b>N/A
	<b>SellingPoint13: </b>N/A
	<b>SellingPoint14: </b>N/A
	<b>SellingPoint15: </b>N/A
	<b>TechSpec Applications: </b>N/A
	<b>TechSpec Diameter (Inches): </b>5.12
	<b>TechSpec Engine Codes: </b>N/A
	<b>TechSpec Includes: </b>(1) Aluminum Truck & Jeep Recovery Ring--(1) Drawstring Carry Bag--Borne Off-Road Lifetime Warranty
	<b>TechSpec Installation Notes: </b>N/A
	<b>TechSpec Length (Inches): </b>N/A
	<b>TechSpec Material: </b>6061 aluminum
	<b>TechSpec Maximum Pressure (PSI): </b>N/A
	<b>TechSpec Maximum Temperature (F): </b>N/A
	<b>TechSpec Minimum Yield Strength: </b>N/A
	<b>TechSpec Note: </b>Inspect ring carefully before use. Damage to the recovery ring may cause damage to synthetic lines and shackles, leading to failure.--------This recovery ring is designed for use with synthetic winch lines and soft shackles only. Use with steel winch lines and shackles may damage the ring and will void the warranty.
	<b>TechSpec Overall Height (Inches): </b>1.89
	<b>TechSpec Thread Size: </b>N/A
	<b>TechSpec Ultimate Tensile Strength: </b>N/A
	<b>TechSpec Weight (Ounces): </b>1.9

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>6 x 6.5 x 2.5 inches
	<b>Weight: </b>1 PG


Borne Off-Road Aluminum Recovery Ring, Large (Truck & Jeep)

Borne Off-Road Aluminum Recovery Ring, Large (Truck &amp; Jeep)
<ul>	<li>Lightweight alternative to snatch blocks</li>
	<li>Borne Off-Road Lifetime Warranty</li>
	<li>Safe for use with synthetic winch lines and soft shackles</li>
	<li>Radiused faces reduce stress on shackle and winch line</li>
	<li>Military-grade hard-anodized coating reduces friction and prevents scratching</li>
	<li>6061 aluminum construction for light weight, corrosion resistance, and high strength</li>
	<li>No bearings for maintenance-free operation</li>
	<li>Large inner and outer radius reduce rotation speed and friction</li>
	<li>22,000 lb. working load limit is strong enough for even the heaviest off-road vehicle</li>
	<li>Accepts 1/2-inch winch line</li>
</ul>


Off-roading and overlanding are 50% driving skill and 50% knowing what to do when you get stuck. And you will get stuck. For that 50% of the time that you&rsquo;re not navigating trails, a proper recovery system is essential. A winch with a strong line, a few shackles, and something to connect them together are the bare minimum when it comes to recovery. In between your winch line and whatever you&rsquo;re using as an anchor, you need something that rotates and takes the strain off your winch line. Twenty years ago, you&rsquo;d be lugging around a heavy steel snatch block and wondering if you greased the bearing recently. But these days, there&rsquo;s a lightweight, simple, safer, and more durable solution in the form of recovery rings. This Borne Off-Road truck and Jeep recovery ring is constructed from ultra-lightweight aircraft grade 6061 aluminum and weighs in at about 1/3 the weight of traditional snatch blocks. Its simple design makes recovery just as simple without worrying about failed or worn-out bearings. Our specially engineered recovery ring features radiused faces that prevent your soft shackle from clamping down on the rings edge, reducing friction for a smoother recovery. The large inner and outer diameters slow the ring&rsquo;s rotation, and the military-grade hard-anodized coating further reduces friction and prevents scratching that can damage synthetic winch lines. The Borne Off-Road truck and Jeep recovery ring accepts a 1/2-inch winch line and has a working load limit of 22,000 lbs. making it strong enough to recover even the largest off-road vehicle. And, like all our products, it&rsquo;s backed by our Borne Off-Road Lifetime Warranty for a lifetime of smooth recoveries.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00840197711156
	<b>Color: </b>N/A
	<b>Install Difficulty: </b>2
	<b>SellingPoint01: </b>Lightweight alternative to snatch blocks
	<b>SellingPoint02: </b>Safe for use with synthetic winch lines and Borne Off-Road soft shackles
	<b>SellingPoint03: </b>Radiused faces reduce stress on shackle and winch line
	<b>SellingPoint04: </b>Military-grade hard-anodized coating reduces friction and prevents scratching
	<b>SellingPoint05: </b>6061 aluminum construction for light weight, corrosion resistance, and high strength
	<b>SellingPoint06: </b>No bearings for maintenance-free operation
	<b>SellingPoint07: </b>Large inner and outer radius reduce rotation speed and friction
	<b>SellingPoint08: </b>Our recovery ring is engineered to surpass the limitations of traditional recovery gear
	<b>SellingPoint09: </b>Accepts 1/4-inch winch line
	<b>SellingPoint10: </b>Borne Off-Road Lifetime Warranty
	<b>SellingPoint11: </b>N/A
	<b>SellingPoint12: </b>N/A
	<b>SellingPoint13: </b>N/A
	<b>SellingPoint14: </b>N/A
	<b>SellingPoint15: </b>N/A
	<b>TechSpec Applications: </b>N/A
	<b>TechSpec Diameter (Inches): </b>3.54
	<b>TechSpec Engine Codes: </b>N/A
	<b>TechSpec Includes: </b>(1) Aluminum ATV & Side-by-Side Recovery Ring--(1) Drawstring Carry Bag--Borne Off-Road Lifetime Warranty
	<b>TechSpec Installation Notes: </b>N/A
	<b>TechSpec Length (Inches): </b>N/A
	<b>TechSpec Material: </b>6061 aluminum
	<b>TechSpec Maximum Pressure (PSI): </b>N/A
	<b>TechSpec Maximum Temperature (F): </b>N/A
	<b>TechSpec Minimum Yield Strength: </b>N/A
	<b>TechSpec Note: </b>Inspect ring carefully before use. Damage to the recovery ring may cause damage to synthetic lines and shackles, leading to failure.----This recovery ring is designed for use with synthetic winch lines and soft shackles only. Use with steel winch lines and shackles may damage the ring and will void the warranty.
	<b>TechSpec Overall Height (Inches): </b>1.41
	<b>TechSpec Thread Size: </b>N/A
	<b>TechSpec Ultimate Tensile Strength: </b>N/A
	<b>TechSpec Weight (Ounces): </b>0.75

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>4 x 4.5 x 2.5 inches
	<b>Weight: </b>1 PG


Borne Off-Road Aluminum Recovery Ring, Small (ATV & Side-By-Side)

Borne Off-Road Aluminum Recovery Ring, Small (ATV &amp; Side-By-Side)
<ul>	<li>Lightweight alternative to snatch blocks</li>
	<li>Borne Off-Road Lifetime Warranty</li>
	<li>Safe for use with synthetic winch lines and soft shackles</li>
	<li>Radiused faces reduce stress on shackle and winch line</li>
	<li>Military-grade hard-anodized coating reduces friction and prevents scratching</li>
	<li>6061 aluminum construction for light weight, corrosion resistance, and high strength</li>
	<li>No bearings for maintenance-free operation</li>
	<li>Large inner and outer radius reduce rotation speed and friction</li>
	<li>12,000 lb. working load limit is strong enough for even the heaviest side-by-side or ATV</li>
	<li>Accepts 1/4-inch winch line</li>
</ul>


The multi-purpose snatch block can double the pulling power of any winch, or change your pulling direction without damaging the wire rope. They also help to reduce heat build up.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748052470

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>14 x 7.25 x 4.5 inches
	<b>Weight: </b>18 PG


Warn

EPIC FORGED PULLEY BLOCK 18K

18000 Pound Maximum Capacity
<ul>	<li>Reduce Heat Buildup And Amp Draw During Recovery</li>
	<li>Constructed Of Forged Steel, With Durable Corrosion-Resistant E-Coat Finish</li>
	<li>Change Your Pulling Direction Without Damaging The Wire Or Synthetic Rope</li>
	<li>CE Rated</li>
</ul>


The multi-purpose snatch block can double the pulling power of any winch, or change your pulling direction without damaging the wire rope. They also help to reduce heat build up.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748921882

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>5.5 x 11 x 2 inches
	<b>Weight: </b>6.5 PG


EPIC FORGED PULLEY BLOCK 12K

12000 Pound Maximum Capacity
<ul>	<li>Reduce Heat Buildup And Amp Draw During Recovery</li>
	<li>Constructed Of Forged Steel, With Durable Corrosion-Resistant E-Coat Finish</li>
	<li>Change Your Pulling Direction Without Damaging The Wire Or Synthetic Rope</li>
	<li>CE Rated</li>
</ul>


The multi-purpose snatch block can double the pulling power of any winch, or change your pulling direction without damaging the wire rope. They also help to reduce heat build up.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748920977

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>5.5 x 11 x 2 inches
	<b>Weight: </b>2.5 PG


EPIC FORGED PULLEY BLOCK 5K

5000 Pound Maximum Capacity
<ul>	<li>Reduce Heat Buildup And Amp Draw During Recovery</li>
	<li>Constructed Of Forged Steel, With Durable Corrosion-Resistant E-Coat Finish</li>
	<li>Change Your Pulling Direction Without Damaging The Wire Or Synthetic Rope</li>
	<li>CE Rated</li>
</ul>


Get the most from any winch with a full line of recovery kits, hardware, and gear that dramatically increases a winch?s versatility and utility. When complicated recoveries require special tactics and technical knowhow, WARN accessories are essential components for any serious off-roader.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748888994

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>10.75 x 5.25 x 2 inches
	<b>Weight: </b>7.4 PG


STANDARD SNATCH BLOCK - 5T

20000 Pound Maximum Capacity; For Winch Capacity up to 10000 Pound with 5/16 Inch Wire Rope; With Grease Port and Overload Indicator
<ul>	<li>Reduces heat build up and amp draw</li>
	<li>Double the pulling power of any winch</li>
	<li>Change pull direction with out damaging rope</li>
</ul>


Get the most from any winch with a full line of recovery kits, hardware, and gear that dramatically increases a winch?s versatility and utility. When complicated recoveries require special tactics and technical knowhow, WARN accessories are essential components for any serious off-roader.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748888987

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>10.5 x 5.5 x 2.5 inches
	<b>Weight: </b>3 PG


STANDARD SNATCHBLOCK - 4.5T

9000 Pound Maximum Capacity
<ul>	<li>Reduces heat build up and amp draw</li>
	<li>Double the pulling power of any winch</li>
	<li>Change pull direction with out damaging rope</li>
</ul>


Warn manufactures products and accessories for Automotive, Powersports, Industrial and commercial users. From self recovery winches and mounting systems to wheel end and driveline disconnects, Warn customers have chosen Warn products for their durability,
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748830863

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>15 x 10 x 5 inches
	<b>Weight: </b>35 PG


HEAVY DUTY SNATCH BLOCK 18T

36000 Pound Maximum Capacity; For Winches with 18000 Pound Capacity; With Grease Port
<ul>	<li>The multi-purpose snatch block can double the pulling power of any winch, or change your pullin</li>
	<li>Doubles The Pulling Power Of Your Winch</li>
	<li>Aids In Sharp Angle And Three Point Rigging</li>
</ul>


Warn manufactures products and accessories for Automotive, Powersports, Industrial and commercial users. From self recovery winches and mounting systems to wheel end and driveline disconnects, Warn customers have chosen Warn products for their durability,
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748808589

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>8 x 20 x 5 inches
	<b>Weight: </b>28 PG


HEAVY DUTY SNATCH BLOCK 30T

60000 Pound Maximum Capacity; For Winches with 30000 Pound Capacity; With Grease Port
<ul>	<li>The multi-purpose snatch block can double the pulling power of any winch, or change your pullin</li>
	<li>Doubles The Pulling Power Of Your Winch</li>
	<li>Aids In Sharp Angle And Three Point Rigging</li>
</ul>


Get the most from any winch with a full line of recovery kits, hardware, and gear that dramatically increases a winch?s versatility and utility. When complicated recoveries require special tactics and technical knowhow, WARN accessories are essential components for any serious off-roader.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748634904

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>8.5 x 10 x 6.25 inches
	<b>Weight: </b>16.99 PG


HEAVY DUTY SNATCH BLOCK-16.5T

33000 Pound Maximum Capacity; For Winches with 16500 Pound Capacity; With Grease Port
<ul>	<li>Reduces heat build up and amp draw</li>
	<li>Double the pulling power of any winch</li>
	<li>Change pull direction with out damaging rope</li>
</ul>


Get the most from any winch with a full line of recovery kits, hardware, and gear that dramatically increases a winch?s versatility and utility. When complicated recoveries require special tactics and technical knowhow, WARN accessories are essential components for any serious off-roader.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00012748156406

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>11.25 x 7.75 x 5 inches
	<b>Weight: </b>9.43 PG


HEAVY DUTY SNATCH BLOCK-12T

24000 Pound Maximum Capacity; For Winches with 12000 Pound Capacity; With Grease Port
<ul>	<li>Reduces heat build up and amp draw</li>
	<li>Double the pulling power of any winch</li>
	<li>Change pull direction with out damaging rope</li>
</ul>
