Finish your custom engine set-up with this adapter from TSP. It allows for easier hook-up in cam swaps.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00843806123135
	<b>Cable Type: </b>Camshaft Position Sensor Harness Adapter
	<b>Prop 65 (C, R or CR): </b>CR
	<b>Prop 65 - Short Label: </b>prop65_warning.jpg
	<b>Prop 65 Flag: </b>Yes
	<b>Quantity: </b>Sold individually

<h3>Extended Information:</h3>
	<b>Emissions : </b>EPA Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>4 x 6 x 8 inches
	<b>Weight: </b>1 PG


Top Street Performance

TSP GM LS VVT to Non-VVT Camshaft Sensor Connector Plug-and-Play Adapter

The XR-700 Points Replacement System is designed as an affordable and better performing alternative to many factory points/electronic module systems such as those from Hitachi, Nippondenso, Bosch, Lucas and others. The system starts with the reliable FAST optical trigger that bolts in place of the breaker points in the distributor. From there, it triggers the XR-700 Ignition Module. This compact inductive ignition module is compatible with 12-volt systems and even accepts positive ground systems. It improves the spark output and delivers up to 400 primary volts with about 60mJ of spark energy so your engine will rev quicker and pull through the straights like never before.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00021174033984
	<b>C.A.R.B. EO Number: </b>D-225-67
	<b>C.A.R.B. Exempt?: </b>Yes
	<b>California Proposition 65: </b>WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>4.75 x 6.13 x 1.44 inches
	<b>Weight: </b>0.14 PG


FAST

Optical Trigger for XR-700

This XR-700 model includes just the trigger.

Optional Harnesses and Connector Kits
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584124481
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>California Proposition 65: </b>WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>6.5 x 3.75 x 2 inches
	<b>Weight: </b>1.2 PG


Adapts an MSD Cam trigger to mate with our XFI Harness

The FAST Crank Trigger is a magnet free device with a durable wheel constructed from high strength steel. With a .125&quot; wheel, it requries less space than compmetitors&#039; aluminum versions. With the wheel being this thin, it not only weighs less but requires less space than competitors? aluminum versions. The FAST inductive sensor is also much smaller than others on the market and is hermetically sealed with the connector molded into the body. This long lasting sensor is used by OEMs both on and inside the motor and provides accurate timing. Compatible with XFI 2.0, XFI Sportsman, EZ-EFI 2.0 or for use with other aftermarket EFI/ignitions.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584211358
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>California Proposition 65: </b>WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>KT
	<b>Dimension: </b>11 x 11.25 x 5.25 inches
	<b>Weight: </b>3.75 PG


Crank Trigger Kit for Small Block Ford with 6.562" Balancer

Ultra durable CNC-machined aluminum bracket with clearly labeled precision timing marks. Magnet-free, ultra-thin .125&quot; steel wheel. Small OEM-quality inductive sensor provides unrivaled accuracy while saving space.

however, modern fuel injection systems and sophisticated testing equipment have exposed inadequacies in traditional crank trigger designs. To correct for timing fluctuations in high-RPM racing applications, FAST engineers replaced the fluctuation prone 2-Wire Inductive Pick-Up with a modern digital Hall-Effect design. This digital Hall-Effect Pickup, coupled with Samarium cobalt magnets installed in the trigger wheel, result in crank rotation measurements that are accurate to  of a degree from 0 to 13,000 engine RPM. The FAST Magnet Crank Trigger Kit&#039;s digital Hall-Effect Pickup is far less susceptible to electromagnetic noise interference than competitors&#039; antiquated 2-wire designs. Additionally, the Digital Hall-Effect Pick-Up&#039;s accuracy is unaffected by electrical system voltage variations: maintaining -degree timing accuracy from 7 Volts to 30 Volts DC. Despite its advanced design, the FAST Magnet Crank Trigger maintains compatibility with other brands&#039; ignition systems. Outputting a clean square-wave signal, the Magnet Crank Trigger can trigger ignition boxes directly or integrate with EFI systems such as the FAST EZ-EFI 2.0, XFI Sportsman and XFI 2.0. An integral LED eases timing calibration and diagnostics. The FAST Magnet Crank Trigger Kit does not sacrifice durability for technological innovation. Crafted from billet aluminum then black anodized, the trigger wheel and pickup brackets will withstand harsh racing environments. OEM quality braided wire wrap protects the pick-up pigtail, while a weatherproof Deutsch connector terminates the harness.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584374749
	<b>Bracket Color: </b>Black
	<b>Bracket Material: </b>Aluminum
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>Fitment/Engine Family: </b>SBF w/ 6.562" Balancer
	<b>Grade: </b>Performance
	<b>Hardware Included: </b>Yes
	<b>Harness Termination/Connection Type: </b>3 Pin Deutsch
	<b>Lead/Harness Length: </b>72
	<b>Mating Harness/Connector Included?: </b>Yes
	<b>Pickup Included: </b>Yes
	<b>Pickup Style: </b>Digital Hall-Effect
	<b>Plug and Play w/ FAST EFI Systems?: </b>Yes
	<b>Pre-Terminated Leads/Harness?: </b>Yes
	<b>Trigger Wheel Color: </b>Black
	<b>Trigger Wheel I.D.: </b>2.375
	<b>Trigger Wheel Material: </b>Aluminum
	<b>Trigger Wheel O.D.: </b>6.565
	<b>Trigger Wheel Thickness: </b>0.375

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>11 x 11.25 x 5.25 inches
	<b>Weight: </b>3.75 PG

<h3>PDF:</h3>
<div><a href='https://sdda.semadata.org/Standard/Edelbrock/F2016-1.pdf' target='_blank'><img src='https://dashboard.carwebdistribution.ca/wp-content/plugins/sema-api/images/pdf_icon.png' style='display:inline'> F2016-1</a></div>

Magnet Crank Trigger Kit for Ford Small Block w/ 6.562 Inch Harmonic Balancer

Equipped with a digital hall-effect pick-up, an anodized trigger wheel and premium Samarium Cobalt magnets, the Ford Small Block Magnet Crank Trigger Kit is durable while maintaining 1/4 degree accuracy and excellent EMI noise resistance.

The XIM Ignition Module lets you easily install the EZ-EFI 2.0, XFI 2.0 and XFI Sportsman on many distributor-less ignition type EFI engines. It?s a simple plug-and-play installation with factory type connectors that plug into your factory sensors. Also available are standalone ignition modules for coil-per-cylinder carb applications or original EZ-EFI that enable programmble control of the late model coil-per-cylinder ignition systems, independent of the fuel delivery method or any factory computer. Nominal dimensions: 7.25&quot;W x 6&quot;H x 2&quot;D.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584229995
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>California Proposition 65: </b>WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Discontinued

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>KT
	<b>Dimension: </b>15.25 x 15 x 4.75 inches
	<b>Weight: </b>3.75 PG


XIM Ford Coyote Kit

This XIM Ford Coyote Kit comes with everything needed to run your Ford Coyote with our EZ 2.0, XFI Sportsman or XFI 2.0.

however, modern fuel injection systems and sophisticated testing equipment have exposed inadequacies in traditional crank trigger designs. To correct for timing fluctuations in high-RPM racing applications, FAST engineers replaced the fluctuation prone 2-Wire Inductive Pick-Up with a modern digital Hall-Effect design. This digital Hall-Effect Pickup, coupled with Samarium cobalt magnets installed in the trigger wheel, result in crank rotation measurements that are accurate to  of a degree from 0 to 13,000 engine RPM. The FAST Magnet Crank Trigger Kit&#039;s digital Hall-Effect Pickup is far less susceptible to electromagnetic noise interference than competitors&#039; antiquated 2-wire designs. Additionally, the Digital Hall-Effect Pick-Up&#039;s accuracy is unaffected by electrical system voltage variations: maintaining -degree timing accuracy from 7 Volts to 30 Volts DC. Despite its advanced design, the FAST Magnet Crank Trigger maintains compatibility with other brands&#039; ignition systems. Outputting a clean square-wave signal, the Magnet Crank Trigger can trigger ignition boxes directly or integrate with EFI systems such as the FAST EZ-EFI 2.0, XFI Sportsman and XFI 2.0. An integral LED eases timing calibration and diagnostics. The FAST Magnet Crank Trigger Kit does not sacrifice durability for technological innovation. Crafted from billet aluminum then black anodized, the trigger wheel and pickup brackets will withstand harsh racing environments. OEM quality braided wire wrap protects the pick-up pigtail, while a weatherproof Deutsch connector terminates the harness.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584375074
	<b>Bracket Color: </b>Black
	<b>Bracket Material: </b>Aluminum
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>Fitment/Engine Family: </b>SBC w/ 8" Balancer
	<b>Grade: </b>Performance
	<b>Hardware Included: </b>Yes
	<b>Harness Termination/Connection Type: </b>3 Pin Deutsch
	<b>Lead/Harness Length: </b>72
	<b>Mating Harness/Connector Included?: </b>Yes
	<b>Pickup Included: </b>Yes
	<b>Pickup Style: </b>Digital Hall-Effect
	<b>Plug and Play w/ FAST EFI Systems?: </b>Yes
	<b>Pre-Terminated Leads/Harness?: </b>Yes
	<b>Trigger Wheel Color: </b>Black
	<b>Trigger Wheel I.D.: </b>2.28
	<b>Trigger Wheel Material: </b>Aluminum
	<b>Trigger Wheel O.D.: </b>8
	<b>Trigger Wheel Thickness: </b>0.375

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13.6 x 9.7 x 2.4 inches
	<b>Weight: </b>3.6 PG

<h3>PDF:</h3>
<div><a href='https://sdda.semadata.org/Standard/Edelbrock/F2016-1.pdf' target='_blank'><img src='https://dashboard.carwebdistribution.ca/wp-content/plugins/sema-api/images/pdf_icon.png' style='display:inline'> F2016-1</a></div>

Magnet Crank Trigger Kit for Chevrolet Small Block w/ 8 Inch Harmonic Balancer

Equipped with a digital hall-effect pick-up, an anodized wheel and premium Samarium Cobalt magnets, the Chevrolet Small Block 8 in Magnet Crank Trigger Kit is durable while maintaining 1/4 degree accuracy and excellent EMI noise resistance.

The FAST Crank Trigger is a magnet free device with a durable wheel constructed from high strength steel. With a .125&quot; wheel, it requries less space than compmetitors&#039; aluminum versions. With the wheel being this thin, it not only weighs less but requires less space than competitors? aluminum versions. The FAST inductive sensor is also much smaller than others on the market and is hermetically sealed with the connector molded into the body. This long lasting sensor is used by OEMs both on and inside the motor and provides accurate timing. Compatible with XFI 2.0, XFI Sportsman, EZ-EFI 2.0 or for use with other aftermarket EFI/ignitions.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584211334
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>California Proposition 65: </b>WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>KT
	<b>Dimension: </b>11 x 11.25 x 5.25 inches
	<b>Weight: </b>3.75 PG


Crank Trigger for SBC with 8" Balancer

FAST&#039;s crank trigger kit provides the installer with everything needed for a clean installation of one of the best and most accurate crank trigger kits available.

however, modern fuel injection systems and sophisticated testing equipment have exposed inadequacies in traditional crank trigger designs. To correct for timing fluctuations in high-RPM racing applications, FAST engineers replaced the fluctuation prone 2-Wire Inductive Pick-Up with a modern digital Hall-Effect design. This digital Hall-Effect Pickup, coupled with Samarium cobalt magnets installed in the trigger wheel, result in crank rotation measurements that are accurate to  of a degree from 0 to 13,000 engine RPM. The FAST Magnet Crank Trigger Kit&#039;s digital Hall-Effect Pickup is far less susceptible to electromagnetic noise interference than competitors&#039; antiquated 2-wire designs. Additionally, the Digital Hall-Effect Pick-Up&#039;s accuracy is unaffected by electrical system voltage variations: maintaining -degree timing accuracy from 7 Volts to 30 Volts DC. Despite its advanced design, the FAST Magnet Crank Trigger maintains compatibility with other brands&#039; ignition systems. Outputting a clean square-wave signal, the Magnet Crank Trigger can trigger ignition boxes directly or integrate with EFI systems such as the FAST EZ-EFI 2.0, XFI Sportsman and XFI 2.0. An integral LED eases timing calibration and diagnostics. The FAST Magnet Crank Trigger Kit does not sacrifice durability for technological innovation. Crafted from billet aluminum then black anodized, the trigger wheel and pickup brackets will withstand harsh racing environments. OEM quality braided wire wrap protects the pick-up pigtail, while a weatherproof Deutsch connector terminates the harness.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584374732
	<b>Bracket Color: </b>Black
	<b>Bracket Material: </b>Aluminum
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>Fitment/Engine Family: </b>SBC w/ 7" Balancer
	<b>Grade: </b>Performance
	<b>Hardware Included: </b>Yes
	<b>Harness Termination/Connection Type: </b>3 Pin Deutsch
	<b>Lead/Harness Length: </b>72
	<b>Mating Harness/Connector Included?: </b>Yes
	<b>Pickup Included: </b>Yes
	<b>Pickup Style: </b>Digital Hall-Effect
	<b>Plug and Play w/ FAST EFI Systems?: </b>Yes
	<b>Pre-Terminated Leads/Harness?: </b>Yes
	<b>Trigger Wheel Color: </b>Black
	<b>Trigger Wheel I.D.: </b>1.946
	<b>Trigger Wheel Material: </b>Aluminum
	<b>Trigger Wheel O.D.: </b>7
	<b>Trigger Wheel Thickness: </b>0.375

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>10.9 x 10.9 x 5.4 inches
	<b>Weight: </b>3.04 PG

<h3>PDF:</h3>
<div><a href='https://sdda.semadata.org/Standard/Edelbrock/F2016-1.pdf' target='_blank'><img src='https://dashboard.carwebdistribution.ca/wp-content/plugins/sema-api/images/pdf_icon.png' style='display:inline'> F2016-1</a></div>

Magnet Crank Trigger Kit for Chevrolet Small Block w/ 7 Inch Harmonic Balancer

Equipped with a digital hall-effect pick-up, an anodized wheel and premium Samarium Cobalt magnets, the Chevrolet Small Block 7 in Magnet Crank Trigger Kit is durable while maintaining 1/4 degree accuracy and excellent EMI noise resistance.

The FAST Crank Trigger is a magnet free device with a durable wheel constructed from high strength steel. With a .125&quot; wheel, it requries less space than compmetitors&#039; aluminum versions. With the wheel being this thin, it not only weighs less but requires less space than competitors? aluminum versions. The FAST inductive sensor is also much smaller than others on the market and is hermetically sealed with the connector molded into the body. This long lasting sensor is used by OEMs both on and inside the motor and provides accurate timing. Compatible with XFI 2.0, XFI Sportsman, EZ-EFI 2.0 or for use with other aftermarket EFI/ignitions.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584211327
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>California Proposition 65: </b>WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>KT
	<b>Dimension: </b>11 x 11.25 x 5.25 inches
	<b>Weight: </b>4.25 PG


Crank Trigger for SBC with 7" Balancer

however, modern fuel injection systems and sophisticated testing equipment have exposed inadequacies in traditional crank trigger designs. To correct for timing fluctuations in high-RPM racing applications, FAST engineers replaced the fluctuation prone 2-Wire Inductive Pick-Up with a modern digital Hall-Effect design. This digital Hall-Effect Pickup, coupled with Samarium cobalt magnets installed in the trigger wheel, result in crank rotation measurements that are accurate to  of a degree from 0 to 13,000 engine RPM. The FAST Magnet Crank Trigger Kit&#039;s digital Hall-Effect Pickup is far less susceptible to electromagnetic noise interference than competitors&#039; antiquated 2-wire designs. Additionally, the Digital Hall-Effect Pick-Up&#039;s accuracy is unaffected by electrical system voltage variations: maintaining -degree timing accuracy from 7 Volts to 30 Volts DC. Despite its advanced design, the FAST Magnet Crank Trigger maintains compatibility with other brands&#039; ignition systems. Outputting a clean square-wave signal, the Magnet Crank Trigger can trigger ignition boxes directly or integrate with EFI systems such as the FAST EZ-EFI 2.0, XFI Sportsman and XFI 2.0. An integral LED eases timing calibration and diagnostics. The FAST Magnet Crank Trigger Kit does not sacrifice durability for technological innovation. Crafted from billet aluminum then black anodized, the trigger wheel and pickup brackets will withstand harsh racing environments. OEM quality braided wire wrap protects the pick-up pigtail, while a weatherproof Deutsch connector terminates the harness.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584374725
	<b>Bracket Color: </b>Black
	<b>Bracket Material: </b>Aluminum
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>Fitment/Engine Family: </b>BBC w/ 8" Balancer
	<b>Grade: </b>Performance
	<b>Hardware Included: </b>Yes
	<b>Harness Termination/Connection Type: </b>3 Pin Deutsch
	<b>Lead/Harness Length: </b>72
	<b>Mating Harness/Connector Included?: </b>Yes
	<b>Pickup Included: </b>Yes
	<b>Pickup Style: </b>Digital Hall-Effect
	<b>Plug and Play w/ FAST EFI Systems?: </b>Yes
	<b>Pre-Terminated Leads/Harness?: </b>Yes
	<b>Trigger Wheel Color: </b>Black
	<b>Trigger Wheel I.D.: </b>2.28
	<b>Trigger Wheel Material: </b>Aluminum
	<b>Trigger Wheel O.D.: </b>8
	<b>Trigger Wheel Thickness: </b>0.375

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13.6 x 9.7 x 2.4 inches
	<b>Weight: </b>3.6 PG

<h3>PDF:</h3>
<div><a href='https://sdda.semadata.org/Standard/Edelbrock/F2016-1.pdf' target='_blank'><img src='https://dashboard.carwebdistribution.ca/wp-content/plugins/sema-api/images/pdf_icon.png' style='display:inline'> F2016-1</a></div>

Magnet Crank Trigger Kit for Chevrolet Big Block w/ 8 Inch Harmonic Balancer

Equipped with a digital hall-effect pick-up, an anodized wheel and premium Samarium Cobalt magnets, the Chevrolet Big Block 8 in Magnet Crank Trigger Kit is durable while maintaining 1/4 degree accuracy and excellent EMI noise resistance.

The FAST Crank Trigger is a magnet free device with a durable wheel constructed from high strength steel. With a .125&quot; wheel, it requries less space than compmetitors&#039; aluminum versions. With the wheel being this thin, it not only weighs less but requires less space than competitors? aluminum versions. The FAST inductive sensor is also much smaller than others on the market and is hermetically sealed with the connector molded into the body. This long lasting sensor is used by OEMs both on and inside the motor and provides accurate timing. Compatible with XFI 2.0, XFI Sportsman, EZ-EFI 2.0 or for use with other aftermarket EFI/ignitions.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00036584211341
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>California Proposition 65: </b>WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

<h3>Extended Information:</h3>
	<b>Emissions : </b>1
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>KT
	<b>Dimension: </b>11 x 11.25 x 5.25 inches
	<b>Weight: </b>3.75 PG


Crank Trigger for BBC with 8in Balancer

Includes mounting hardware along with an OEM quality sensor that is plug and play with any aftermarket EFI system.

If you?re running a crank trigger system with the magnets installed in the trigger wheel, the FAST Non-Magnetic Crank Trigger Pickup is a more accurate, highly reliable replacement sensor. It is designed to replace a common non-magnetic pickup with a ?&quot;-16 UNF threaded housing. The FAST sensor produces the most precise signal from cranking through redline RPM and is accurate to within ? 0.1?! There is also a useful LED built-in that is extremely helpful when setting up the static timing before firing up the engine.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00021174162035
	<b>C.A.R.B. EO Number: </b>N/A
	<b>C.A.R.B. Exempt?: </b>No
	<b>California Proposition 65: </b>WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

<h3>Extended Information:</h3>
	<b>Emissions : </b>CARB Eligible
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>8 x 5 x 2 inches
	<b>Weight: </b>0.5 PG


Non-Magnetic Crank Trigger Pickup Replacement

This Hall-Effect pickup is more accurate than Magnetic Crank Triggers.