Starting with the recently released Holley(R) HP Series Carburetors, JET takes them to their maximum potential for the ultimate 4150 race carburetor. Venturi size is increased by .030 and throttle shafts are trimmed and radiused for the ultimate airflow from a standard flange carburetor. The metering blocks are fully blueprinted, balancing main well volumes, optimizing the emulsion system, idle circuit calibration, power valve circuit sizing and high speed calibration to precisely match the specifications of your motor. Delivering the ultimate fuel curve and fuel atomization for maximum horsepower and torque, plus unmatched throttle response and consistency. When you want the ultimate 4150 series carburetor for your pro street or race vehicle, the Jet Stage 4 HP is it.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330031332
	<b>Barrel: </b>Four
	<b>CFM: </b>950
	<b>Choke: </b>None
	<b>Emission: </b>OEM
	<b>Finish: </b>Anodized
	<b>Flange: </b>Square Bore
	<b>Type: </b>Automotive
	<b>Usage: </b>Street/Strip
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>14 x 14 x 10 inches
	<b>Weight: </b>14 PG


Jet Performance

Holley Stage 4 Series Carburetor

Holley Stage 4 Series Carburetor; 4 bbl; 950 HP; 950 cfm;
<ul>	<li>Throttle Shafts Are Trimmed</li>
	<li>Ultimate Airflow From A Standard Flange Carburetor</li>
	<li>Metering Blocks Are Fully Blueprinted</li>
	<li>Balancing Main Well Volumes</li>
	<li>Optimizing The Emulsion System</li>
	<li>Idle Circuit Calibration</li>
	<li>Ultimate Fuel Curve And Fuel Atomization</li>
</ul>


A Stage 1 Holley(R) 2 BBL starts with a core that shows the greatest stock airflow. Metering blocks are fully modified, and the jetting, power valve and accelerator pump circuits are calibrated for the specific application. These modifications are done to promote maximum off-the-corner torque as well as straight-away horsepower. A .130 needle and seat is installed for high RPM fuel delivery and the float is modified to control fuel slosh during cornering and braking. The carburetor is assembled using the highest quality components and finished with a 3/8  in. fuel inlet.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330029056
	<b>Barrel: </b>Two
	<b>CFM: </b>350
	<b>Choke: </b>Manual
	<b>Emission: </b>OEM
	<b>Finish: </b>Anodized
	<b>Flange: </b>OEM
	<b>Type: </b>Automotive
	<b>Usage: </b>Street/Strip
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>14 x 14 x 10 inches
	<b>Weight: </b>14 PG


Holley Stage 1 Carburetor

Holley Stage 1 Carburetor; 2 bbl; 350 cfm; 0.130 Needle And Seat; 3/8 Fuel Inlet; 14 lbs.;
<ul>	<li>Metering Blocks Are Fully Modified</li>
	<li>Jet Power Valve/Accelerator Pump Are Calibrated</li>
	<li>Maximum Off The Corner Torque/Straight Away HP</li>
	<li>Modified To Control Fuel Slosh</li>
	<li>Assembled Using The Highest Quality Components</li>
</ul>


A Stage 2 starts with all of the modifications of a Stage 1 and features a 1.75 throttle bore butterfly versus a 1.690 that is stock. This increases airflow and also helps equalize fuel distribution in the intake manifold. This is commonly referred to as a cheater carburetor because it passes any inspection as long as it is not removed from the manifold.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330029063
	<b>Barrel: </b>Two
	<b>CFM: </b>350
	<b>Choke: </b>None
	<b>Emission: </b>OEM
	<b>Finish: </b>Anodized
	<b>Flange: </b>OEM
	<b>Type: </b>Automotive
	<b>Usage: </b>Street/Strip
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>14 x 14 x 10 inches
	<b>Weight: </b>14 PG


Holley Stage 2 Carburetor

Holley Stage 2 Carburetor; 2 bbl; 350 cfm; 1.75 Throttle Bore; 3/8 Fuel Inlet; 14 lbs.;
<ul>	<li>All The Modifications Of A Stage 1</li>
	<li>Increases Air Flow</li>
	<li>Equalize Fuel Distribution In The Intake Manifold</li>
</ul>


A Stage 3 features all of the modifications of a Stage 1 and 2 plus the venturi diameter is increased to the maximum allowable size for a substantial increase in airflow. A Stage 3 is intended for classes where full modified carburetors are openly allowed.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330029070
	<b>Barrel: </b>Two
	<b>CFM: </b>350
	<b>Choke: </b>None
	<b>Emission: </b>OEM
	<b>Finish: </b>Anodized
	<b>Flange: </b>OEM
	<b>Type: </b>Automotive
	<b>Usage: </b>Street/Strip
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>14 x 14 x 10 inches
	<b>Weight: </b>14 PG


Holley Stage 3 Carburetor

Holley Stage 3 Carburetor; 2 bbl; 350 cfm; 14 lbs.;
<ul>	<li>All The Modifications Of A Stage 1 And 2</li>
	<li>Venturi Diameter Is Increased To The Maximum Size</li>
	<li>Substantial Increase In Airflow</li>
	<li>Intended For Full Modified Carburetors</li>
</ul>


A Stage 3 is intended for high performance pro street style vehicles and racing application. All Stage 3 carburetors include all of the Stage 1 and 2 modifications plus radiused air inlet area and modified venturis for greatly increased airflow, modified discharge boosters for increased signal strength and atomization, machines throttle shafts, four corner idle circuits, fully modified metering blocks, modified floats and high flow needle and seats. These carburetors are custom turned and calibrate for each specific application. Electric choke is optional on all Stage 3 carburetors.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330017404
	<b>Barrel: </b>Four
	<b>CFM: </b>600
	<b>Choke: </b>None
	<b>Emission: </b>N/A
	<b>Finish: </b>Anodized
	<b>Flange: </b>Square Bore
	<b>Type: </b>Automotive
	<b>Usage: </b>Street/Hi-Performance
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>14 x 14 x 10 inches
	<b>Weight: </b>14 PG


Holley Stage 3 Carburetor; 4 bbl; 600 cfm; Vacuum Secondary; Electric Choke Is Optional; 14 lbs.;
<ul>	<li>All The Modifications Of A Stage 1 And 2</li>
	<li>Intended For Pro-Street Racing Applications</li>
	<li>Modified Venturis/Increased Air Flow</li>
	<li>Modified Discharge Boosters And Metering Blocks</li>
	<li>Increased Signal Strength And Fuel Atomization</li>
	<li>Machined Throttle Shafts</li>
	<li>Four Corner Idle Circuits/Modified Floats</li>
	<li>High Flow Needle And Seats</li>
</ul>


A Stage 2 features all the modification of a State 1 plus the fuel metering circuits are inspected, blueprinted and then calibrated to match any modifications done to the engine such as intake manifold, headers, ignition or cam change, and intended use of the vehicle, the air horn is milled to improve and equalize airflow between the primaries and secondary. Electric choke and four corner idle circuit are optional on all Stage 2 carburetors.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330017398
	<b>Barrel: </b>Four
	<b>CFM: </b>600
	<b>Choke: </b>None
	<b>Emission: </b>N/A
	<b>Finish: </b>Anodized
	<b>Flange: </b>Square Bore
	<b>Type: </b>Automatic
	<b>Usage: </b>Street/Strip
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>14 x 14 x 10 inches
	<b>Weight: </b>14 PG


Holley Stage 2 Carburetor; 4 bbl; 600 cfm; Vacuum Secondary; Electric Choke and Four Corner Idle Circuit Are Optional;
<ul>	<li>All The Modifications Of Stage 1</li>
	<li>Fuel Metering Circuits Are Inspected</li>
	<li>Air Horn Is Milled To Improve/Equalize Air Flow</li>
	<li>Quick Change Cover Kit Is Optional</li>
</ul>


Holley 670 CFM Brawler Carburetor, Vacuum Secondaries, 4150
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00887753913791
	<b>CFM:: </b>670 CFM
	<b>Choke Type: </b>Electric
	<b>Emissions: </b>Non-EGR Rated
	<b>Finish: </b>Silver
	<b>Flange: </b>Square Bore
	<b>Fuel Inlet: </b>Dual
	<b>Fuel: </b>Gas
	<b>Kickdown: </b>Includes Ford Provision. Or GM/Chrysler with additional bracket
	<b>Manufacturer Part#: </b>BR-67256
	<b>Manufacturer: </b>Holley
	<b>Number of Barrels: </b>4
	<b>Quantity: </b>Sold Individually
	<b>Throttle Linkage type: </b>Universal

<h3>Extended Information:</h3>
	<b>Emissions : </b>Racing or Pre-Emissions Use Only
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 11 x 8 inches
	<b>Weight: </b>8.4 PG


BluePrint Engines

HOLLEY 670 CFM BRAWLER CARBURETOR - VACUUM SECONDARIES - 4150

HOLLEY 670 CFM BRAWLER CARBURETOR, VACUUM SECONDARIES, 4150
<ul>	<li>Holley 670 CFM Brawler Carburetor, Vacuum Secondaries, 4150</li>
</ul>


Holley 750 CFM Classic Carburetor, Electric Choke Vacuum Secondaries, 4160
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00887753912466
	<b>CFM:: </b>850 CFM
	<b>Choke Type: </b>Electric
	<b>Emissions: </b>Non-EGR Rated
	<b>Finish: </b>Silver
	<b>Flange: </b>Square Bore
	<b>Fuel Inlet: </b>Dual
	<b>Fuel: </b>Gas
	<b>Kickdown: </b>Includes Ford Provision. Or GM/Chrysler with additional bracket
	<b>Manufacturer Part#: </b>0-80508S
	<b>Manufacturer: </b>Holley
	<b>Number of Barrels: </b>4
	<b>Quantity: </b>Sold Individually
	<b>Throttle Linkage type: </b>Universal

<h3>Extended Information:</h3>
	<b>Emissions : </b>Racing or Pre-Emissions Use Only
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 11 x 8 inches
	<b>Weight: </b>8.4 PG


HOLLEY 750 CFM CLASSIC CARBURETOR - ELECTRIC CHOKE VACUUM SECONDARIES - 4160

HOLLEY 750 CFM CLASSIC CARBURETOR, ELECTRIC CHOKE VACUUM SECONDARIES, 4160
<ul>	<li>HOLLEY 750 CFM CLASSIC CARBURETOR, ELECTRIC CHOKE VACUUM SECONDARIES, 4160</li>
</ul>


Holley 950 CFM Double Pumper Carburetor, Mechanical Secondaries, 4150
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00887753912442
	<b>CFM:: </b>950 CFM
	<b>Choke Type: </b>None
	<b>Emissions: </b>Non-EGR Rated
	<b>Finish: </b>Silver
	<b>Flange: </b>Square Bore
	<b>Fuel Inlet: </b>Dual
	<b>Fuel: </b>Gas
	<b>Kickdown: </b>Includes Ford Provision. Or GM/Chrysler with additional bracket
	<b>Manufacturer Part#: </b>0-82951SA
	<b>Manufacturer: </b>Holley
	<b>Number of Barrels: </b>4
	<b>Quantity: </b>Sold Individually
	<b>Throttle Linkage type: </b>Universal

<h3>Extended Information:</h3>
	<b>Emissions : </b>Racing or Pre-Emissions Use Only
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 11 x 8 inches
	<b>Weight: </b>8.4 PG


HOLLEY 950 CFM DOUBLE PUMPER CARBURETOR - MECHANICAL SECONDARIES - 4150

HOLLEY 950 CFM DOUBLE PUMPER CARBURETOR, MECHANICAL SECONDARIES, 4150
<ul>	<li>HOLLEY 950 CFM DOUBLE PUMPER CARBURETOR, MECHANICAL SECONDARIES, 4150</li>
</ul>


Holley 850CFM Double Pumper Carb, Manual Chock
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00887753912459
	<b>CFM:: </b>750 CFM
	<b>Choke Type: </b>Manual
	<b>Emissions: </b>Non-EGR Rated
	<b>Finish: </b>Silver
	<b>Flange: </b>Square Bore
	<b>Fuel Inlet: </b>Dual
	<b>Fuel: </b>Gas
	<b>Kickdown: </b>Includes Ford Provision. Or GM/Chrysler with additional bracket
	<b>Manufacturer Part#: </b>0-4781S
	<b>Manufacturer: </b>Holley
	<b>Number of Barrels: </b>4
	<b>Quantity: </b>Sold Individually
	<b>Throttle Linkage type: </b>Universal

<h3>Extended Information:</h3>
	<b>Emissions : </b>Racing or Pre-Emissions Use Only
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 11 x 8 inches
	<b>Weight: </b>8.4 PG


HOLLEY 850 CFM DOUBLE PUMPER CARBURETOR - MANUAL CHOKE - MECHANICAL SECONDARIES - 4150

Holley 850CFM Double Pumper Carb, Manual Chock
<ul>	<li>Holley 850CFM Double Pumper Carb, Manual Chock</li>
</ul>


Holley 600 CFM Classic Carburetor, Electric Choke Vacuum Secondaries, 4160
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00887753912473
	<b>CFM:: </b>600 CFM
	<b>Choke Type: </b>Electric
	<b>Emissions: </b>Non-EGR Rated
	<b>Finish: </b>Silver
	<b>Flange: </b>Square Bore
	<b>Fuel Inlet: </b>Dual
	<b>Fuel: </b>Gas
	<b>Kickdown: </b>Includes Ford Provision. Or GM/Chrysler with additional bracket
	<b>Manufacturer Part#: </b>0-80457SA
	<b>Manufacturer: </b>Holley
	<b>Number of Barrels: </b>4
	<b>Quantity: </b>Sold Individually
	<b>Throttle Linkage type: </b>Universal

<h3>Extended Information:</h3>
	<b>Emissions : </b>Racing or Pre-Emissions Use Only
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 11 x 8 inches
	<b>Weight: </b>8.4 PG


HOLLEY 600 CFM CLASSIC CARBURETOR - ELECTRIC CHOKE VACUUM SECONDARIES - 4160

HOLLEY 600 CFM CLASSIC CARBURETOR, ELECTRIC CHOKE VACUUM SECONDARIES, 4160
<ul>	<li>HOLLEY 600 CFM CLASSIC CARBURETOR, ELECTRIC CHOKE VACUUM SECONDARIES, 4160</li>
</ul>



<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00086923020127
	<b>Additional Details: </b>Fits carbs with 5 1/8 in. necks.
	<b>California Proposition 65: </b>WARNING: Reproductive Harm. For more info visit www.P65Warnings.ca.gov
	<b>Material: </b>Plastic
	<b>Photo Disclaimer: </b>Actual product design, construction, or included components may vary.
	<b>Product Details: </b>Keeps dirt & contaminants out of your carburetor during storage or down time.

<h3>Extended Information:</h3>
	<b>Emissions : </b>Racing or Pre-Emissions Use Only
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>8.63 x 7.63 x 2.25 inches
	<b>Weight: </b>0.3 PG


Trans-Dapt Performance

TRANS-DAPT PERFORMANCE PRODUCTS PLASTIC CARBURETOR HAT FOR 5-1/8 IN. NECK CARBURETORS

Plastic CARBURETOR Hat for 5-1/8 in. Neck Carburetors


<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00086923020073
	<b>Additional Details: </b>Fits carbs with 5 1/8 in. necks.
	<b>California Proposition 65: </b>WARNING: Cancer & Reproductive Harm. For more info visit www.P65Warnings.ca.gov
	<b>Contents: </b>Aluminum carburetor hat, retaining thumb screw
	<b>Material: </b>Aluminum
	<b>Package Contents: </b>Aluminum carburetor hat, retaining thumb screw
	<b>Photo Disclaimer: </b>Actual product design, construction, or included components may vary.
	<b>Product Details: </b>This spun aluminum carb hat keeps dirt and contaminants out of your carburetor during storage or down time. For use with 5-1/8 in. neck carburetors

<h3>Extended Information:</h3>
	<b>Emissions : </b>Racing or Pre-Emissions Use Only
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>11.75 x 8.5 x 2.25 inches
	<b>Weight: </b>0.4 PG


TRANS-DAPT PERFORMANCE PRODUCTS SPUN ALUMINUM CARB COVER 5 1/8 IN. NECK


<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864025016
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>4
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


REFURBISHED, Q-JET CARBURATOR, 750 CFM ELECTRIC CHOKE

REFURBISHED, Q-JET CARBURATOR, 750 CFM ELECTRIC CHOKE, &quot;C&quot;- OEM STYLE THROTTLE LINKAGE, 283-350 CI Engines


<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864025023
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


REFURBISHED, Q-JET CARBURATOR, 750 CFM ELECTRIC CHOKE, UNIVERSAL STYLE THROTTLE LINKAGE, 283-350 CI Engines


<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864025030
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


REFURBISHED, Q-JET CARBURATOR, 750 CFM, ELECTRIC CHOKE, COMES WITH MERCRUISER MARINE LINKAGE, (MEETS U.S. COAST GUARD REQUIREMENTS)


<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864025054
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


REFURBISHED, Q-JET CARBURATOR, 800 CFM ELECTRIC CHOKE

REFURBISHED, Q-JET CARBURATOR, 800 CFM ELECTRIC CHOKE, UNIVERAL STYLE THROTTLE LINKAGE, 350-455 CI Engines


<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864025061
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


REFURBISHED, Q-JET CARBURATOR, 800 CFM, ELECTRIC CHOKE, COMES WITH MERCRUISER MARINE LINKAGE, (MEETS U.S. COAST GUARD REQUIREMENTS)


<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864025047
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


REFURBISHED, Q-JET CARBURATOR, 800 CFM ELECTRIC CHOKE, &quot;C&quot; - OEM STYLE THROTTLE LINKAGE, 350-455 CI Engines

Our Quadrajet carburetors are all new, with parts that you can trust to keep your engine running smoothly, mile after mile. It&#039;s also assembled and run tested right here in the USA! Our new Rochester Quadrajet carburetors are manufactured with all new components. In addition to our new Rochester Quadrajet carburetors. Marine version is a great upgrade from stock GM marine carburetors and are also equipped with our industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. Our carburetors are compatible with Mercruiser Marine throttle linkages. Available in 650 CFM and 695 CFM and meets U.S. coast guard requirements. All - NEW, not rebuilt or remanufactured 650 &amp; 695 CFM Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment. Universal replacement for most GM marine applications Includes most required vacuum ports Complete with a one wire electric choke Meets US Coast Guard requirements. Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864022886
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


Q-JET CARBURATOR, 800 CFM, ELECTRIC CHOKE

Q-JET CARBURATOR, 800 CFM, ELECTRIC CHOKE, COMES WITH MERCRUISER MARINE LINKAGE, (MEETS U.S. COAST GUARD REQUIREMENTS)
<ul>	<li>?New, not rebuilt or remanufactured</li>
	<li>Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment</li>
	<li>Universal replacement for most GM</li>
	<li>Includes most required vacuum ports</li>
	<li>Complete with a one wire electric choke</li>
	<li>Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.</li>
</ul>


Our new Rochester Quadrajet carburetors are manufactured with all new components. They are a significant upgrade to stock carburetors for most GM Automotive applications. Every carburetor is equipped with our industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. PRW carburetors are compatible with C and U style throttle linkages suitable for stock intake manifolds. Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864022879
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


Q-JET CARBURATOR, 800 CFM ELECTRIC CHOKE, "U" STYLE THROTTLE LINKAGE

Q-JET CARBURATOR, 800 CFM ELECTRIC CHOKE, &quot;U&quot; STYLE THROTTLE LINKAGE, 350-455 CI Engines
<ul>	<li>?New, not rebuilt or remanufactured</li>
	<li>Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment</li>
	<li>Universal replacement for most GM</li>
	<li>Includes most required vacuum ports (8)</li>
	<li>Complete with a one wire electric choke</li>
	<li>Assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.</li>
</ul>


Our new Rochester Quadrajet carburetors are manufactured with all new components. They are a significant upgrade to stock carburetors for most GM Automotive applications. Every carburetor is equipped with our industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. PRW carburetors are compatible with C and U style throttle linkages suitable for stock intake manifolds. Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864022862
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


Q-JET CARBURATOR, 800 CFM ELECTRIC CHOKE, "C" STYLE THROTTLE LINKAGE

Q-JET CARBURATOR, 800 CFM ELECTRIC CHOKE, &quot;C&quot; STYLE THROTTLE LINKAGE, 350-455 CI Engines
<ul>	<li>New, not rebuilt or remanufactured</li>
	<li>Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment</li>
	<li>Universal replacement for most GM</li>
	<li>Includes most required vacuum ports (8)</li>
	<li>Complete with a one wire electric choke</li>
	<li>Assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.</li>
</ul>


Our Quadrajet carburetors are all new, with parts that you can trust to keep your engine running smoothly, mile after mile. It&#039;s also assembled and run tested right here in the USA! Our new Rochester Quadrajet carburetors are manufactured with all new components. In addition to our new Rochester Quadrajet carburetors. Marine version is a great upgrade from stock GM marine carburetors and are also equipped with our industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. Our carburetors are compatible with Mercruiser Marine throttle linkages. Available in 650 CFM and 695 CFM and meets U.S. coast guard requirements. All - NEW, not rebuilt or remanufactured 650 &amp; 695 CFM Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment. Universal replacement for most GM marine applications Includes most required vacuum ports Complete with a one wire electric choke Meets US Coast Guard requirements. Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864022855
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


Rochester Quadrajet Marine 750 CFM Carburetor

MARINE Q-JET CARBURATOR, 750 CFM, ELECTRIC CHOKE, COMES WITH MERCRUISER MARINE LINKAGE, (MEETS U.S. COAST GUARD REQUIREMENTS)
<ul>	<li>New, not rebuilt or remanufactured</li>
	<li>Industry first Lean/Rich adjustment allowing up to 15 percent rich lean main circuit adjustment</li>
	<li>Universal replacement for most GM</li>
	<li>Includes most required vacuum ports</li>
	<li>Complete with a one wire electric choke</li>
	<li>Assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.</li>
</ul>


Our new Rochester Quadrajet carburetors are manufactured with all new components. They are a significant upgrade to stock carburetors for most GM Automotive applications. Every carburetor is equipped with our industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. PRW carburetors are compatible with C and U style throttle linkages suitable for stock intake manifolds. Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00842864022848
	<b>Prop 65 (C, R, or CR): </b>CR
	<b>Prop 65 - Short Label: </b>WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
	<b>Prop 65 Warning Label: </b>prop65.jpg
	<b>Prop 65 Yes/No: </b>Yes

<h3>Extended Information:</h3>
	<b>Emissions : </b>Emissions Compliance Exempt
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>13 x 10.2 x 7 inches
	<b>Weight: </b>7.8 PG


Q-JET CARBURATOR, 750 CFM ELECTRIC CHOKE, "U" STYLE THROTTLE LINKAGE

Q-JET CARBURATOR, 750 CFM ELECTRIC CHOKE, &quot;U&quot; STYLE THROTTLE LINKAGE, 283-350 CI Engines
<ul>	<li>All - New, not rebuilt or remanufactured</li>
	<li>Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment</li>
	<li>Universal replacement for most GM</li>
	<li>Includes most required vacuum ports (8)</li>
	<li>One wire electric choke</li>
	<li>Designed and Assembled with all gaskets, metering rods, jets and air bleeds made in the USA!</li>
</ul>
