Starting with the recently released Holley(R) HP Series Carburetors, JET takes them to their maximum potential for the ultimate 4150 race carburetor. Venturi size is increased by .030 and throttle shafts are trimmed and radiused for the ultimate airflow from a standard flange carburetor. The metering blocks are fully blueprinted, balancing main well volumes, optimizing the emulsion system, idle circuit calibration, power valve circuit sizing and high speed calibration to precisely match the specifications of your motor. Delivering the ultimate fuel curve and fuel atomization for maximum horsepower and torque, plus unmatched throttle response and consistency. When you want the ultimate 4150 series carburetor for your pro street or race vehicle, the Jet Stage 4 HP is it.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330031332
	<b>Barrel: </b>Four
	<b>CFM: </b>950
	<b>Choke: </b>None
	<b>Emission: </b>OEM
	<b>Finish: </b>Anodized
	<b>Flange: </b>Square Bore
	<b>Type: </b>Automotive
	<b>Usage: </b>Street/Strip
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>14 x 14 x 10 inches
	<b>Weight: </b>14 PG


Jet Performance

Holley Stage 4 Series Carburetor

Holley Stage 4 Series Carburetor; 4 bbl; 950 HP; 950 cfm;
<ul>	<li>Throttle Shafts Are Trimmed</li>
	<li>Ultimate Airflow From A Standard Flange Carburetor</li>
	<li>Metering Blocks Are Fully Blueprinted</li>
	<li>Balancing Main Well Volumes</li>
	<li>Optimizing The Emulsion System</li>
	<li>Idle Circuit Calibration</li>
	<li>Ultimate Fuel Curve And Fuel Atomization</li>
</ul>


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000569
	<b>WARNING CA Proposition 65 Message: </b>WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Powr-Flo Throttle Body

Powr-Flo Throttle Body; Direct Replacement; Bolt On;
<ul>	<li>More Horsepower</li>
	<li>Better Mileage</li>
	<li>Quicker Throttle Response</li>
</ul>


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000583
	<b>WARNING CA Proposition 65 Message: </b>WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


The JET Powr-Flo Throttle Body is a direct replacement for the factory unit. It can be used to replace a worn out throttle body or to upgrade the existing throttle body. JET Powr-Flo Throttle Body provides increased air flow for improved throttle response by taking advantage of JET&#039;s unique inlet design. JET Powr-Flo Throttle Bodies include all NEW pre-installed calibrated electronics to allow for a simple &#039;remove and replace&#039; installation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000521
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Powr-Flo Throttle Body; Direct Replacement;
<ul>	<li>Modified Air Inlet To Improve Airflow And Throttle Response</li>
	<li>Unique Design Increases Air Velocity To The Intake Manifold</li>
	<li>Pre-Installed Calibrated Electronics For Optimum Performance</li>
	<li>Direct Replacement Of Stock Throttle Body</li>
	<li>CNC Machined Aircraft-Quality Aluminum Casting</li>
	<li>Made In The U.S.A.</li>
</ul>


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00066433044820
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Powr-Flo Throttle Body; Direct Replacement; Bolt On; 61 mm Bore;
<ul>	<li>More Horsepower</li>
	<li>Better Mileage</li>
	<li>Quicker Throttle Response</li>
</ul>


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00066433044950
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Powr-Flo Throttle Body; Bolt On; Direct Replacement;
<ul>	<li>More Horsepower</li>
	<li>Better Mileage</li>
	<li>Quicker Throttle Response</li>
</ul>


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00066433044714
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG

<h3>PDF:</h3>
<div><a href='https://sdda.semadata.org/Standard/Jet Performance/JET_76126.pdf' target='_blank'><img src='https://dashboard.carwebdistribution.ca/wp-content/plugins/sema-api/images/pdf_icon.png' style='display:inline'> JET_76126</a></div>

Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00066433044707
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG

<h3>PDF:</h3>
<div><a href='https://sdda.semadata.org/Standard/Jet Performance/JET_76125.pdf' target='_blank'><img src='https://dashboard.carwebdistribution.ca/wp-content/plugins/sema-api/images/pdf_icon.png' style='display:inline'> JET_76125</a></div>

Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000613
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG

<h3>PDF:</h3>
<div><a href='https://sdda.semadata.org/Standard/Jet Performance/JET_76139.pdf' target='_blank'><img src='https://dashboard.carwebdistribution.ca/wp-content/plugins/sema-api/images/pdf_icon.png' style='display:inline'> JET_76139</a></div>

Powr-Flo Throttle Body; Direct Replacement; Bolt On; 53 mm Bore;
<ul>	<li>More Horsepower</li>
	<li>Better Mileage</li>
	<li>Quicker Throttle Response</li>
</ul>


The JET Powr-Flo Throttle Body is a direct replacement for the factory unit. It can be used to replace a worn out throttle body or to upgrade the existing throttle body. JET Powr-Flo Throttle Body provides increased air flow for improved throttle response by taking advantage of JET&#039;s unique inlet design. JET Powr-Flo Throttle Bodies include all NEW pre-installed calibrated electronics to allow for a simple &#039;remove and replace&#039; installation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000545
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


The JET Powr-Flo Throttle Body is a direct replacement for the factory unit. It can be used to replace a worn out throttle body or to upgrade the existing throttle body. JET Powr-Flo Throttle Body provides increased air flow for improved throttle response by taking advantage of JET&#039;s unique inlet design. JET Powr-Flo Throttle Bodies include all NEW pre-installed calibrated electronics to allow for a simple &#039;remove and replace&#039; installation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000538
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000514
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000415
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


The JET Powr-Flo Throttle Body is a direct replacement for the factory unit. It can be used to replace a worn out throttle body or to upgrade the existing throttle body. JET Powr-Flo Throttle Body provides increased air flow for improved throttle response by taking advantage of JET&#039;s unique inlet design. JET Powr-Flo Throttle Bodies include all NEW pre-installed calibrated electronics to allow for a simple &#039;remove and replace&#039; installation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000507
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies for GM cable style vehicles available in 92mm or 102mm. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. Benefits = More Horsepower, Better Mileage, and Improved Air Flow.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000491
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Powr-Flo Throttle Body; Direct Replacement; Bolt On; 92 mm Bore;
<ul>	<li>More Horsepower</li>
	<li>Better Mileage</li>
	<li>Quicker Throttle Response</li>
</ul>


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies for GM cable style vehicles available in 92mm or 102mm. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. Benefits = More Horsepower, Better Mileage, and Improved Air Flow.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000484
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Powr-Flo Throttle Body; Direct Replacement; Bolt On; 102 mm Bore;
<ul>	<li>More Horsepower</li>
	<li>Better Mileage</li>
	<li>Quicker Throttle Response</li>
</ul>


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000385
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000378
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000620
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG

<h3>PDF:</h3>
<div><a href='https://sdda.semadata.org/Standard/Jet Performance/JET_76124.pdf' target='_blank'><img src='https://dashboard.carwebdistribution.ca/wp-content/plugins/sema-api/images/pdf_icon.png' style='display:inline'> JET_76124</a></div>

The JET Powr-Flo Throttle Body is a direct replacement for the factory unit. It can be used to replace a worn out throttle body or to upgrade the existing throttle body. JET Powr-Flo Throttle Body provides increased air flow for improved throttle response by taking advantage of JET&#039;s unique inlet design. JET Powr-Flo Throttle Bodies include all NEW pre-installed calibrated electronics to allow for a simple &#039;remove and replace&#039; installation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330044622
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Powr-Flo Throttle Body; 81mm; Direct Replacement;
<ul>	<li>Increased Air Flow And Improved Throttle Response</li>
	<li>Unique Design Increases Air Velocity To The Intake Manifold</li>
	<li>Pre-Installed Calibrated Electronics For Optimum Performance</li>
	<li>Direct Replacement Of Stock Throttle Body</li>
	<li>CNC Machined Aircraft Quality Aluminum Casting</li>
	<li>Made In The USA</li>
</ul>


The JET Powr-Flo Throttle Body is a direct replacement for the factory unit. It can be used to replace a worn out throttle body or to upgrade the existing throttle body. JET Powr-Flo Throttle Body provides increased air flow for improved throttle response by taking advantage of JET&#039;s unique inlet design. JET Powr-Flo Throttle Bodies include all NEW pre-installed calibrated electronics to allow for a simple &#039;remove and replace&#039; installation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330044639
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Powr-Flo Throttle Body; 74mm; Direct Replacement;
<ul>	<li>Increased Air Flow And Improved Throttle Response</li>
	<li>Unique Design Increases Air Velocity To The Intake Manifold</li>
	<li>Pre-Installed Calibrated Electronics For Optimum Performance</li>
	<li>Direct Replacement Of Stock Throttle Body</li>
	<li>CNC Machined Aircraft Quality Aluminum Casting</li>
	<li>Made In The USA</li>
</ul>


Direct Bolt on, hi-flow replacement performance throttle body. JET Throttle Bodies have preinstalled updated electronics. JET&#039;s CNC Machined 356 Aluminum Castings allows for increased air flow. This will allow for improved throttle response and more horsepower thru the entire driving range. Benefits = More Horsepower, Better Mileage, and Quicker Throttle Response.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00664330000606
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG

<h3>PDF:</h3>
<div><a href='https://sdda.semadata.org/Standard/Jet Performance/JET_76152.pdf' target='_blank'><img src='https://dashboard.carwebdistribution.ca/wp-content/plugins/sema-api/images/pdf_icon.png' style='display:inline'> JET_76152</a></div>

The JET Powr-Flo Throttle Body is a direct replacement for the factory unit. It can be used to replace a worn out throttle body or to upgrade the existing throttle body. JET Powr-Flo Throttle Body provides increased air flow for improved throttle response by taking advantage of JET&#039;s unique inlet design. JET Powr-Flo Throttle Bodies include all NEW pre-installed calibrated electronics to allow for a simple &#039;remove and replace&#039; installation.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330044646
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>12 x 9 x 7 inches
	<b>Weight: </b>4 PG


Powr-Flo Throttle Body; 74mm; Direct Replacement;
<ul>	<li>Modified Air Inlet To Improve Air Flow And Throttle Response</li>
	<li>Unique Design Increases Air Velocity To The Intake Manifold</li>
	<li>Pre-Installed Calibrated Electronics For Optimum Performance</li>
	<li>Direct Replacement Of Stock Throttle Body</li>
	<li>CNC Machined Aircraft Quality Aluminum Casting</li>
	<li>Made In The USA</li>
	<li>Bore Size 74mm</li>
</ul>


A Stage 1 Holley(R) 2 BBL starts with a core that shows the greatest stock airflow. Metering blocks are fully modified, and the jetting, power valve and accelerator pump circuits are calibrated for the specific application. These modifications are done to promote maximum off-the-corner torque as well as straight-away horsepower. A .130 needle and seat is installed for high RPM fuel delivery and the float is modified to control fuel slosh during cornering and braking. The carburetor is assembled using the highest quality components and finished with a 3/8  in. fuel inlet.
<h3>Additional Attributes:</h3>
	<b>GTIN: </b>00064330029056
	<b>Barrel: </b>Two
	<b>CFM: </b>350
	<b>Choke: </b>Manual
	<b>Emission: </b>OEM
	<b>Finish: </b>Anodized
	<b>Flange: </b>OEM
	<b>Type: </b>Automotive
	<b>Usage: </b>Street/Strip
	<b>WARNING CA Proposition 65 Message: </b>Warning Cancer and Reproductive Harm
	<b>WARNING CA Proposition 65: </b>Yes

<h3>Extended Information:</h3>
	<b>Life Cycle Status: </b>Available To Order

<h3>Packaging:</h3>
	<b>Quantity of Each: </b>1
	<b>Package UOM: </b>EA
	<b>Dimension: </b>14 x 14 x 10 inches
	<b>Weight: </b>14 PG


Holley Stage 1 Carburetor

Holley Stage 1 Carburetor; 2 bbl; 350 cfm; 0.130 Needle And Seat; 3/8 Fuel Inlet; 14 lbs.;
<ul>	<li>Metering Blocks Are Fully Modified</li>
	<li>Jet Power Valve/Accelerator Pump Are Calibrated</li>
	<li>Maximum Off The Corner Torque/Straight Away HP</li>
	<li>Modified To Control Fuel Slosh</li>
	<li>Assembled Using The Highest Quality Components</li>
</ul>
